Samsung GT-I8530 Dead Boot repair Done

[Bahauddin_khokon]

[2019-11-24 8:19:42 PM] [START OPERATION_ID = RESURRECT]
[2019-11-24 8:20:06 PM] Open serial port...OK
[2019-11-24 8:20:06 PM] Connecting to the RIFF Box...OK
[2019-11-24 8:20:06 PM] Firmware Version: 1.52 (RIFFBOX1), JTAG Manager Version: 1.86
[2019-11-24 8:20:06 PM] Selected Resurrector: [Samsung I8530 V1.0.4705.16748]
[2019-11-24 8:20:06 PM]
[2019-11-24 8:20:06 PM] Connecting to the dead body...OK
[2019-11-24 8:20:06 PM] Detected dead body ID: 0x4BA00477 - CORRECT!
[2019-11-24 8:20:06 PM] Set I/O Voltage reads as 1.79V, TCK Frequency is 2 MHz
[2019-11-24 8:20:06 PM]
[2019-11-24 8:20:06 PM] Resurrection sequence started.
[2019-11-24 8:20:06 PM] Establish communication with the phone...OK
[2019-11-24 8:20:06 PM] Initializing internal hardware configuration...OK
[2019-11-24 8:20:06 PM] Uploading resurrector data into memory...OK
[2019-11-24 8:20:06 PM] Starting communication with resurrector...OK
[2019-11-24 8:20:06 PM]
[2019-11-24 8:20:06 PM] Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM08G, 0x0001D2000000 Bytes = 7.28 GB)
[2019-11-24 8:20:06 PM] Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0000 (SEM08G, 0x000000200000 Bytes = 2.00 MB)
[2019-11-24 8:20:06 PM]
[2019-11-24 8:20:06 PM] Selected Resurrection Data for the eMMC Chip with Capacity = 7.28GB
[2019-11-24 8:20:06 PM]
[2019-11-24 8:20:06 PM] Flashing the dead body...OK
[2019-11-24 8:20:06 PM] Resurrection complete!
[2019-11-24 8:20:06 PM] [FINISH OPERATION_ID = RESURRECT]