Announcement
Collapse
No announcement yet.
RIFF Updates - 27.12.2016
Collapse
X
-
Originally posted by giaguaro View PostHi , please where is clk resistor on desire 820n , don't have schematic, not show on pinout image
How to isp HTC Desire820n
For emmc_isp operation:
- remove CLK resistor (0R)
- soldering wire to TP "CLK"
- soldering wires to TP's "Dat0" and "CMD" and "GND"
- attach Battery
- plug in USB
- click emmc detect
After emmc_isp operation done:
- unplug USB and Battery
- de-soldering wires and pull jumper instead of CLK resistor (or soldering back CLK resistor)
How to isp HTC OneM8su
For emmc_isp operation:
- soldering wire to TP "CLK"
- soldering wires to TP's "Dat0" and "CMD" and "GND"
- plug in USB (in some cases also attach Battery)
- click emmc detect
After emmc_isp operation done:
- unplug USB (and Battery)
- de-soldering wiresAttached FilesLast edited by nicolayer; 12-29-2016, 05:57 PM.
Comment
-
connected as describet still got error
please help, riffbox v2, brand new error ,connected as described but still got error Connecting to the SD/eMMC Card Failed (ERR[006E], POS[0003])
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.41 (RIFFBOX2), JTAG Manager Version: 1.63
Connecting to the SD/eMMC Card...ERROR
Set I/O Voltage reads as 3.31V, SD_CLK Frequency is 6 MHz
Connecting to the SD/eMMC Card Failed (ERR[006E], POS[0003])Last edited by giaguaro; 01-03-2017, 12:15 PM.
Comment
-
HTC D820u Need A More Hint ?
htc 820u isp pinout please and dump - Unlock Forum - RIFF Box support forum
Comment
-
-
hello , ihave activated my riffbox support emmc and i have tested it ,today i wont to work with it ,it ask fo activation support with 30cridit ,plz help hwat happened with meAttached Files
Comment
-
Hi,
I have problem with few package. I download all and after restart box was instaled without HTC Desire 300 G3U.riffpkg LT30A H.riffpkg and P3100_16GB_XLoader+.riffpkg. One of them is HTC desire and I still doesn't know how to repair it.
Thx for replyLast edited by data112; 02-14-2017, 06:43 AM.
Comment
Comment