Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.41 (RIFFBOX1), JTAG Manager Version: 1.65
Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 2.71V, SD_CLK Frequency is 960 KHz
Detected eMMC Chip, ID: 0x15/0x00 (AWMB3R), User Area Partition = 0x0003A3E00000 Bytes (14.56 GB)
Writting "User Area Partition" memory from 0x000000000000 to 0x0003A3DFFFFF
ERROR: DCC Loader has reported Error Code = 0x71 (0x00001B). Trying to recover...OK
ERROR: Timeout while waiting for eMMC/SD Write Response. Trying to recover...OK
ERROR: Timeout while waiting for eMMC/SD Write Response. Trying to recover...OK
ERROR: Stopped due to multiple communication errors. Terminating at 0x000000000000
Connecting to the RIFF Box...OK
Firmware Version: 1.41 (RIFFBOX1), JTAG Manager Version: 1.65
Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 2.71V, SD_CLK Frequency is 960 KHz
Detected eMMC Chip, ID: 0x15/0x00 (AWMB3R), User Area Partition = 0x0003A3E00000 Bytes (14.56 GB)
Writting "User Area Partition" memory from 0x000000000000 to 0x0003A3DFFFFF
ERROR: DCC Loader has reported Error Code = 0x71 (0x00001B). Trying to recover...OK
ERROR: Timeout while waiting for eMMC/SD Write Response. Trying to recover...OK
ERROR: Timeout while waiting for eMMC/SD Write Response. Trying to recover...OK
ERROR: Stopped due to multiple communication errors. Terminating at 0x000000000000
Comment