Important information related to RIFF Box eMMC support

[syedadeelali]

Need a HTC one M7 PN01730 EMMC PINout

hi,

i need a above phone emmc pinout

[amr.oka]

please explain connection !!

[ahmc]

very good.i ready for activation because i love riff box............

[cak hadi]

Thank you for info,... i will try it

[ansyah]

please sir,iam need activasi riff box eMMC support???

[darklander]

Greeting. Where and how to buy credits to activate the eMMC support?

[ayips]

Nice Update

[anderd]

So if box is older than 6 months, you need credits to do EMMC repairs? Im confused here, can someone help explain this to me?

[boad56]

Thank you for info,... i will try it

[againit]

real good news. nice update

[ansyah]

Hello dear users !

This topic will serve as initial guide for RIFF Box eMMC ISP/Direct functionality. This is not regular update, but rather a major upgrade.
As such, it will come free for all RIFF Boxes registered in last 6 months, and of course for all new RIFF Box customers.

To prepare everything on Your side for this upgrade, You'll need the following:

• RJ45 cable
• 2x100 ohms resistors
• External source for VCC and VCCQ (Optional)
• Moorc adapters (Optional)
• Activation credits (If Your box is older than 6 months)

RJ45 cable is required to connect RIFF Box to eMMC as RIFF Box RJ45 port is used for this function.

2x100 Ohms resistors are required as pull up, to increase signal levels and improve stability.



Extarnal source for VCC and VCCQ is required in case that You don't want to open Your RIFF Box, in order to connect RIFF Box internal VCC voltage source. We know that there are already some adapters on market, which offer this function.


Moorc adapters are well known, and they offer best at price range.



Activation credits You can get in exchange for some money. We have too many of those, and we will be happy to exchange some of them to real money.



RIFF Box RJ45 port pinout:

1-NC
2-SD_CLK
3-SD_DAT0
4-SD_CMD
5-NC
6-NC
7-NC
8-GND
VCC pin is located on RIFF Box motherboard, bottom side. You can locate it if You check attached photo.

Pull up resistors should be connected from VCCQ to both SD_CMD and SD_DAT0 lines.

pliss help my sir......
Open serial port...OK
Connecting to the RIFF Box...OK

Getting RIFF Box Info...OK
RIFF Box Firmware Version: 1.37

Connecting to the Updates Server...OK
Downloading new Firmware from Server...ERROR
ERROR: Your Registration is Expired. Contact Reseller to re-new.

[ansyah]

i need setup riff beta tester....Getting RIFF Box Info...OK
RIFF Box S/N: XXXXXXXXXXXXXXXXXXX
RIFF Box Firmware Version: 1.37
plissss help me

[mbek0508]

pictur direct riff box no download

[Black-micron]

kmk5u000vm-b309

Открытие порта...ok
Подключение к riff Боксу...ok
Версия Прошивки: 1.38.6b, Версия jtag manager: 1.57 [beta 4]

connecting to the sd/emmc card...ok
Выставленное i/o Напряжение 3.30v, sd_clk frequency is 2.50 mhz

memory type .......................... Emmc
manufacturer id ...................... 0x15
oem/application id ................... 0x00
product name ......................... "k5u00m"
package .............................. Bga
user area partition size ............. 0x0000e9000000 bytes (3.64 gb)
boot partition size .................. 0x000000200000 bytes (2.00 mb)
rpmb partition size .................. 0x000000020000 bytes (128.00 kb)
ocr register ......................... 0xc0ff8080 (dual voltage, high capacity)
write protection bits ................ None
boot configuration ................... Boot from boot partition 1 (bus width = 1bit)
chip revision ........................ 0.2
multimedia card revision ............. 1.5 (emmc v4.41)
serial number ........................ 0x8b28c82d
memory manufacturing date ............ December, 2013

Открытие порта...ok
Подключение к riff Боксу...ok
Версия Прошивки: 1.38.6b, Версия jtag manager: 1.57 [beta 4]

connecting to the sd/emmc card...ok
Выставленное i/o Напряжение 3.30v, sd_clk frequency is 2.50 mhz

detected emmc chip, id: 0x15/0x00 (k5u00m), user area partition = 0x0000e9000000 bytes (3.64 gb)

reading the [kmk5u000vm-b309] emmc core firmware...ok
current firmware hash code: Ff0df2ca4b8b6c9444ddcac4bb3901d5f6d8279b27538fef33 24e2ded4f2b94f
saved to file: [c:\users\вася\desktop\firmware\kmk5u000vm-b309_firmware[ff0df2ca].riffmmcfw]

[Black-micron]

kmk7u000vm-b309

Открытие порта...ok
Подключение к riff Боксу...ok
Версия Прошивки: 1.38.6b, Версия jtag manager: 1.57 [beta 4]

connecting to the sd/emmc card...ok
Выставленное i/o Напряжение 3.30v, sd_clk frequency is 2.50 mhz

memory type .......................... Emmc
manufacturer id ...................... 0x15
oem/application id ................... 0x00
product name ......................... "k7u00m"
package .............................. Bga
user area partition size ............. 0x0001d2000000 bytes (7.28 gb)
boot partition size .................. 0x000000400000 bytes (4.00 mb)
rpmb partition size .................. 0x000000040000 bytes (256.00 kb)
ocr register ......................... 0xc0ff8080 (dual voltage, high capacity)
write protection bits ................ None
boot configuration ................... Boot from boot partition 2 (bus width = 1bit)
chip revision ........................ 0.8
multimedia card revision ............. 1.5 (emmc v4.41)
serial number ........................ 0xcbee8a34
memory manufacturing date ............ August, 2013