Tested eMMC pinouts

[silver anjel]

Sorry the data is correct
thank you very mach team

[brahim1977]

sm-t111 please pinout isp emmc

[duchungmobile]

please pinout isp emmc Lumia535 rm-1090

[thuanloivtnt]

please pinout isp emmc sc-01d

[shaval]

Please pinout isp emmc Lenov s856. Thanks

[electrodynamics]

here is j100 pinout

[22.7.2016. 22:43:54] Connecting to the SD/eMMC Card...OK
[22.7.2016. 22:43:54] Set I/O Voltage reads as 3.30V, SD_CLK Frequency is 960 KHz
[22.7.2016. 22:43:54] 
[22.7.2016. 22:43:54] Memory Type .......................... eMMC
[22.7.2016. 22:43:54] Manufacturer ID ...................... 0x90
[22.7.2016. 22:43:54] OEM/Application ID ................... 0x4A
[22.7.2016. 22:43:54] Product Name ......................... "H4G2b "
[22.7.2016. 22:43:54] Package .............................. BGA
[22.7.2016. 22:43:54] User Area Partition Size ............. 0x0000E9000000 Bytes (3.64 GB)
[22.7.2016. 22:43:54] Boot Partition Size .................. 0x000000400000 Bytes (4.00 MB)
[22.7.2016. 22:43:54] RPMB Partition Size .................. 0x000000400000 Bytes (4.00 MB)
[22.7.2016. 22:43:54] OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
[22.7.2016. 22:43:54] Write Protection Bits ................ NONE
[22.7.2016. 22:43:54] Boot Configuration ................... Boot from Boot Partition 1 (Bus Width = 1Bit)
[22.7.2016. 22:43:54] Chip Revision ........................ 0.1
[22.7.2016. 22:43:54] Multimedia Card Revision ............. 1.6 (eMMC v4.5, v4.51)
[22.7.2016. 22:43:54] Serial Number ........................ 0x042AA04B
[22.7.2016. 22:43:54] Memory Manufacturing Date ............ October, 2015

Sir the pinout labels are too small to be seen.

[22229999]

G750&hol-t00

[toninhosantos]

I need LG E615f emmc pinout for remove wp (write protection).

[klcheng]

need zen2 5.5 emmc pinout

[DR.DEATH]

SM-A700YD
DONT NEED USE EXTERNEL POWER ;;; JUST USB AND DATA0 ,CMD ,CLK , GND

[klcheng]

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.41 (RIFFBOX1), JTAG Manager Version: 1.62
Selected Resurrector: [HTC Butterfly (PL9911000) V1.0.5046.47879]

Connecting to the dead body...OK
Detected dead body ID: 0x107190E1 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is 1 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...FAILED
ERROR: No response from the RIFF Box.


X920d qualcomm HS-USB QDLoader9008

anyone master can help me this error

this brick dump file

[atou]

i need nokia lumia 520 pinout

[arif4indri]

i need nokia lumia 520 pinout

]"]Link

[Black-micron]

Samsung J500H ISP connected RIFF JTAG 1

Открытие порта...OK
Подключение к RIFF Боксу...OK
Версия Прошивки: 1.41 (RIFFBOX1), Версия JTAG Manager: 1.62

Connecting to the SD/eMMC Card...OK
Выставленное I/O Напряжение 1.80V, SD_CLK Frequency is 2.50 MHz

Memory Type .......................... eMMC
Manufacturer ID ...................... 0x15
OEM/Application ID ................... 0x00
Product Name ......................... "QN16MB"
Package .............................. BGA
User Area Partition Size ............. 0x0001D2000000 Bytes (7.28 GB)
Boot Partition Size .................. 0x000000400000 Bytes (4.00 MB)
RPMB Partition Size .................. 0x000000080000 Bytes (512.00 KB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
Write Protection Bits ................ NONE
Boot Configuration ................... No Boot
Chip Revision ........................ 0.0
Multimedia Card Revision ............. 1.7 (eMMC v5.0)
Serial Number ........................ 0x493FD03D
Memory Manufacturing Date ............ December, 2015

[atou]

[QUOTE=arif4indri;184897][

i have question yu will working with cable emmc colors or not necessary?

I NEED TO EMMC BIN


THX