Renault clio radio code

[Notion]

ok that will be good

Hi hay88, ok here is s phot of the radio specs. I hope this might shed some light as to why the 4383 code dosnt work.

Thanks, Colin

[hay88]

Hi hay88, ok here is s phot of the radio specs. I hope this might shed some light as to why the 4383 code dosnt work.

Thanks, Colin[ATTACH=CONFIG]3573[/ATTACH]

yes thats the right code if still not working then the radio must have been re-coded and your need to go to a Decode Service who will plug it into a laptop and electronically read/recode the memory chip (EEPROM)

Please note that code entry is only possible when a number is flashing in the seperate display. If the display continually shows "CODE" then the unit may be codelocked and will need to be left switched on up for up to two hours to reset before another code entry attempt is possible.
Code Entry as Follows:

Switch Radio On - Display Shows
" 0000 " with the 1st digit flashing
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
If the correct code number is now shown
Press And Hold " ¬ " Until A Beep Is Heard

[Adeyemi omo-ogunkoya]

How to enter radio code

Hello, I have the access code on my model year 2001 Clio which is "1865" my problem is I don't know the process of how to input it in the car, please not it does not have a display screen. I just bought the car. Thanks for any assistance you can offer.

Yemi.

[hay88]

Hello, I have the access code on my model year 2001 Clio which is "1865" my problem is I don't know the process of how to input it in the car, please not it does not have a display screen. I just bought the car. Thanks for any assistance you can offer.

Yemi.

You must hold at the end to store your code.
IF YOU DONT HAVE ¬ KEY THEN PUSH THUMBWHEEL IN AND SOME HAVE {A¬} KEY

Turn on the radio and the display will show 'CODE'
Use the steering controls for code entry.
Press the [ ¬] button then rotate the thumb wheel for the correct first digit
Press the [ ¬] button then rotate the thumb wheel for the correct second digit
Press the [ ¬] button then rotate the thumb wheel for the correct third digit
Press the [ ¬] button then rotate the thumb wheel for the correct fourth digit
If the correct code is now shown on screen,
press and hold the [ ¬] button for up to 10 seconds to store the code

FOR NO STEERING CONTROL
press the first preset button for the 1st digit,
second button for the 2nd digit
third button for 3rd digit
forth button for 4th digit
then press and HOLD button 6 to store. for 10 seconds

and on some it's hold 5 to store.

[Notion]

yes thats the right code if still not working then the radio must have been re-coded and your need to go to a Decode Service who will plug it into a laptop and electronically read/recode the memory chip (EEPROM)

Please note that code entry is only possible when a number is flashing in the seperate display. If the display continually shows "CODE" then the unit may be codelocked and will need to be left switched on up for up to two hours to reset before another code entry attempt is possible.
Code Entry as Follows:

Switch Radio On - Display Shows
" 0000 " with the 1st digit flashing
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
If the correct code number is now shown
Press And Hold " ¬ " Until A Beep Is Heard

Hi again, thanks for that... I am almost certain that this radio has been recoded as I have followed all the intructions which are the same as in the radio manual and still no luck. After 32 minutes the display shows the 4 zeros with the first flashing as you mentioned. After entering the last number so that the display shows 4383 with the last three flashing, I press and hold " ¬ " Until A Beep Is Heard but then is goes back to displaying "ERROR".

Oh well many thanks for all of you that have helped me, guess I'll have to take it to a dealer that can recode if for me.

cheers,

Colin

[AMagicalCone]

Hi all, I need a code for the car I have just bought. It's a 1999 Renault Clio.

The numbers I can see on the radio are:

77 00 428 254 Ind.A
FD 9935
7 648 124 391
BP8124X7977334

Any help would be massively appreciated!

[hay88]

Hi all, I need a code for the car I have just bought. It's a 1999 Renault Clio.

The numbers I can see on the radio are:

77 00 428 254 Ind.A
FD 9935
7 648 124 391
BP8124X7977334

Any help would be massively appreciated!

code 6919

[Adeyemi omo-ogunkoya]

Hello hay88, I just have to say thank you properly, now I can listen to music again while doing my long boring trips. Much love. 1ne

[hay88]

Hello hay88, I just have to say thank you properly, now I can listen to music again while doing my long boring trips. Much love. 1ne

your welcome glad to help.

[forestgimp]

please help !

RNRDC080057665
RENRDW300-60
FD0308150057665

8200 633 634
8200633634T

Thank´s in advanced

[_Franky_]

please help !

RNRDC080057665
RENRDW300-60
FD0308150057665

8200 633 634
8200633634T

Thank´s in advanced

please , post last 4 digits behind the barcode or the 4 digits security number like F123

[forestgimp]

please , post last 4 digits behind the barcode or the 4 digits security number like F123

Sorry C254

[_Franky_]

Sorry C254

C254 = Code 1723

[forestgimp]

I´ll try !

thanks´n greets !

[alex1978]

Hi everyone, would really appreciate any help in getting a code for my new Clio!

model number: 22dc278/62b
TOJ771
RN278F30351288
prod. number: FD0403010351288
820057681TJ771
8200057681

Thanks in advance,

Alex