Peugeot 206 blaupunkt radio code needed

[Brettiray]

Blaupunkt radio Peugeot t1 low

96 251 330 80

Blaupunkt werke GmbH

Bp8140w7040348

7 648 140 392

Hope this helps me get a code

[Goncalves]

Blaupunkt radio Peugeot t1 low

96 251 330 80

Blaupunkt werke GmbH

Bp8140w7040348

7 648 140 392

Hope this helps me get a code

Hi,

Try Code .... 2466

[Brettiray]

Tried code 2466 all it comes up with is error 5

[Goncalves]

Tried code 2466 all it comes up with is error 5

Hi,

Please check all figures.

[Brettiray]

Got a few more numbers.

C6bpm7040348
C72000006937

Etched onto the radio are

8 635 132 690 07
St 02 z 275 na

[Goncalves]

Got a few more numbers.

C6bpm7040348
C72000006937

Etched onto the radio are

8 635 132 690 07
St 02 z 275 na

Hi,

Please check the references cited



BP8140w7040348

7 648 140 392

[RegWorts]

Got a few more numbers.

C6bpm7040348
C72000006937

Etched onto the radio are

8 635 132 690 07
St 02 z 275 na

If BP8140W7040348 is correct then 2466 is the correct code

[Brettiray]

How do I get the number on. Only goes from 1-6. Will the code work. Just keeps saying error 5

[Goncalves]

How do I get the number on. Only goes from 1-6. Will the code work. Just keeps saying error 5

Please note that code entry is only possible when "CODE" is displayed on the split screen. If the unit is codelocked it should be left on for up to two hours to reset before another code entry attempt is possible. If it does not reset after this time, then all of your code entry attempts may have been used, and the unit must be taken in decoding Radio Service is unlikely to be available for free or cheap from anywhere on the Internet.

Code Entry as Follows:

Switch Radio On - Display Shows
" CODE " then " - - - - "
Enter CODE in the order it is read:
For Example, To Enter Code 1234
Press Preset 1 then 2 then 3 then 4
The Code will Enter Itself Automatically

[Brettiray]

As soon as the radio is turned on it says error 5

[Brettiray]

Does error 5 mean my radio is broke or can a code still be put in for the radio to work

[RegWorts]

Does error 5 mean my radio is broke or can a code still be put in for the radio to work

Leave the radio SWITCHED ON ....UNDISTURBED until the screen resets the display to CODE

This can take an hour or longer