Fiat Punto MK II radio code

[Endurac]

Hello guys,

i would appreciate Your help regarding radio (cassette) code for original fiat punto 2 radio.

Numbers are:

BP NR 764 937 4316
Prod.no. FIAT: 735 272 570

I got the radio from a friend and upon installment on the screen shows the message "check.."

I would assume that asking for a correct way to input code would be too much, so i will try to get that information in appropriate topic..

Thanks a lot in advance....

[masterskay62]

Hello guys,

i would appreciate Your help regarding radio (cassette) code for original fiat punto 2 radio.

Numbers are:

BP NR 764 937 4316
Prod.no. FIAT: 735 272 570

I got the radio from a friend and upon installment on the screen shows the message "check.."

I would assume that asking for a correct way to input code would be too much, so i will try to get that information in appropriate topic..

Thanks a lot in advance....

Please numbers BP9374******xx ( 12 digits )

[Endurac]

Thanks for help, i will post all numbers from radio in a matter of few hours.

[Sowi]

Please numbers BP9374******xx ( 12 digits )

:seeya:

Code IMMO ... + code

@++

[Endurac]

here are additional numbers: thanks guys:

BP 937 4X0 416 454

021426
E469

[masterskay62]

here are additional numbers: thanks guys:

BP 937 4X0 416 454

021426
E469

code is 3353 + IMMO
IMMO means the radio has to be electronically linked to the car's electronics.

[Endurac]

Thanks a lot. May I ask just one more question...

does that (IMMO) mean that i have to connect also the top upper jack since i have only 2 euro jacks coming from the radio slot plus antenna cable. I do have all three jacks on radio, but only two sets of wires and 2 jacks from the car (speakers up, and power/ground,memory,antenna jack down)?

Thanks a lot for the code, indeed

I do not seem to be able to set radio to input code...it lights though but shows message check....

[Sowi]

Thanks a lot. May I ask just one more question...

does that (IMMO) mean that i have to connect also the top upper jack since i have only 2 euro jacks coming from the radio slot plus antenna cable. I do have all three jacks on radio, but only two sets of wires and 2 jacks from the car (speakers up, and power/ground,memory,antenna jack down)?

Thanks a lot for the code, indeed

I do not seem to be able to set radio to input code...it lights though but shows message check....

IMMO = You must go to your dealer to marry radio and car.

@++

[Endurac]

IMMO = You must go to your dealer to marry radio and car.

@++

hehehe looks like it. I`ll let u know how the ceremony ended)))

Thanks

[Sowi]

hehehe looks like it. I`ll let u know how the ceremony ended)))

Thanks

@++