Mondeo code needed - 8 digit serial number displayed???

[mondeo_chris]

I have an 02 plate mondeo Ghia x

I did "6 and 1" on the radio and got the following

CDx6ExOT
MSWV49
MV 02-14
E07C8199

[RegWorts]

I have an 02 plate mondeo Ghia x

I did "6 and 1" on the radio and got the following

CDx6ExOT
MSWV49
MV 02-14
E07C8199

The correct radio SERIAL NUMBER is required for a code

It usually begins with M or V followed by SIX digits ...such as M654321 or V654321

Sometimes pressing buttons 6 & 1 together or 6 & 2 will display this number

Otherwise remove the radio from the dashboard and post the SERIAL NUMBER found on a label on the casing

Radio removal instructions can be found here

FREE Car Stereo, & Radio Removal Guides Database

[mondeo_chris]

The correct radio SERIAL NUMBER is required for a code

It usually begins with M or V followed by SIX digits ...such as M654321 or V654321

Sometimes pressing buttons 6 & 1 together or 6 & 2 will display this number

Otherwise remove the radio from the dashboard and post the SERIAL NUMBER found on a label on the casing

Radio removal instructions can be found here

FREE Car Stereo, & Radio Removal Guides Database

I have taken the radio out and the Serial number is M076117 (I guess I should have just done this in the first place)

[Dekster]

I have taken the radio out and the Serial number is M076117 (I guess I should have just done this in the first place)

Try code 0648

[mondeo_chris]

Try code 0648

Thanks...

I forgot to mention that on the side of the radio was a sticker with Mar 2007 on it, I don't know if that makes a difference as it is 2002 car - may be not the original?

Also the radio still works but I want to disconnect the battery to replace a seat motor. Is there a way to test the code before disconnecting the battery?

Thanks in advance.

[RegWorts]

Thanks...

I forgot to mention that on the side of the radio was a sticker with Mar 2007 on it, I don't know if that makes a difference as it is 2002 car - may be not the original?

Also the radio still works but I want to disconnect the battery to replace a seat motor. Is there a way to test the code before disconnecting the battery?

Thanks in advance.

no..but if you have quoted the correct Serial Number then you have the correct code.

The alternative is to buy one of these

search for "car code memory" on Ebay

[mondeo_chris]

no..but if you have quoted the correct Serial Number then you have the correct code.

The alternative is to buy one of these

search for "car code memory" on Ebay

Thanks - I finally got round to this at the weekend and the code was correct as you mentioned - thanks very much for this