Tweet
Post your Success Stories with Chinese Miracle software here
All Success Stories with Chinese Miracle(CM2) software Post Only here
-
-
Samsung Tab Clone Factory Firmware read done
Start at : [5/23/2016 / 9:46:01 PM]
Operation : Read Flash [ v1.47 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 25 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : FE014E5031585858581200CA02AD9239
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xFE , OEM : 014E
[eMMC] : FLASH_INF : [MICRON] , XXXX1
[eMMC] : FLASH_CID : FE014E5031585858581200CA02AD9239
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E6800000
[eMMC] : FLASH_UCP : 3688 MiB [eMMC 4 GiB]
DEV RID : 8B34C4ECAA804B7E3BB085D03EEA91FA
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ...
Brand : Tab
ProdName : m72_emmc_s6_pcb22_to1024_ddr1
ProdModel : Tab
Device : m72_emmc_s6_pcb22_to1024_ddr1
AndroidVer: 4.4.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1.12
[Read Ok] : preloader_m72_emmc_s6_pcb22_to1024_ddr1.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img
[ScatCFG] : MT6572 / V1.1.1 / m72_emmc_s6_pcb22_to1024_ddr1 / EMMC
Android Info saved
FW Size : 673 MiB
Scatter saved to : C:\Documents and Settings\Tapas\My Documents\Downloads\MT6572__Tab__Tab__m72_emmc_s6_ pcb22_to1024_ddr1__4.4.2__ALPS.JB3.MP.V1.12\
All done!
Done!
Elapsed: 00:03:25
Reconnect Power/Cable! -
Symphony P6 Android ver 5.0 Read Done
Symphony P6 Android ver 5.0 Read Done
Code:Start at : [5/17/2016 / 8:25:45 PM] Operation : Read Flash [ v1.37 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 30 ] Sync... Inital regs read done Boot Info : BB_CPU_ID : 6582 BB_CPU_HW : CB00 BB_CPU_SW : 8A00 BB_CPU_SB : 0001 BB_CPU_NM : [MediaTek] MT6582_S00 Processing BROM stage SecCfgVal : 0x00000000 BromVersion : 0xFF BLVersion : 0x01 Preloader Status : Alive Processing DA stage DA Select done , sending DA Ver : MTK_AllInOne_DA_v7.1533.03 NAND_ID : 00000000000000000000000000000000 eMMC_ID : 150100523832314D4200485AF2D0A24D DA Stat : v4.2 on BBID : 0x87 DA Sent. Configure setting now ... DA started successuflly eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0015 , OEM : 0100 [eMMC] : FLASH_INF : [SAMSUNG] , BM128 [eMMC] : FLASH_CID : 150100523832314D4200485AF2D0A24D [eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000 [eMMC] : FLASH_LEN : 0x00000003A3E00000 [eMMC] : FLASH_UCP : 14910 MiB INT RAM : 0x00020000 EXT RAM : 0x40000000 BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Reading Flash Conent now ... Brand : Symphony ProdName : P6 ProdModel : P6 Device : P6 AndroidVer: 5.0 MTKxCPU : MT6582 MTKxPRJ : S3566_DS35661_SYMPHONY-P6-FL_L106 [Read Ok] : preloader_s3566.bin [Read Ok] : MBR [Read Ok] : EBR1 [Read Ok] : lk.bin [Read Ok] : boot.img [Read Ok] : recovery.img [Read Ok] : secro.img [Read Ok] : logo.bin [Read Ok] : EBR2 [Read Ok] : test.img [Read Ok] : system.img [Read Ok] : cache.img [Read Ok] : userdata.img [ScatCFG] : MT6582 / V1.1.1 / s3566 / EMMC FW Size : 1338 MiB Scatter saved to : C:\Users\Tapas\Desktop\MT6582__Symphony__P6__P6__5 .0__S3566_DS35661_SYMPHONY-P6-FL_L106\ All done! Done! Elapsed: 00:05:32 Reconnect Power/Cable!Comment
Comment