Announcement
Collapse
No announcement yet.
24 hours Ambulance services for mobiles in DRAGON MOBILE HOSPITAL
Collapse
This is a sticky topic.
X
X
-
Receive Data 0x7E Error... - Android CPU Solution
We want to provide the solution through some hints/tips because this is not software problem but this is driver problem.
we are starting this thread, so that the we also could be confirm by our valuable customer. So, try to connect our supporter
if you are stuck in any point
Check this post
Just a moment...
Also if you find the problem like this:
]"]404 Not Found
In such a case, open the "DEVICE MANAGER"
]"]404 Not Found
we can see the driver name as "SPRD U2S Diag"
"SPRD U2S Diag" driver not for SPD chip Device. So, when you try each and every time, it shows error.
we need uninstall it and instll to sci (spd flash driver).
open the c:\windows\system32
]"]404 Not Found
And search all "sprd" and "spd" name files
]"]404 Not Found
Delete all
after del,you need use dragon software pinfind again
after pinfind,in the driver manager will tell you install the new driver
]"]404 Not Found
]"]404 Not Found
]"]404 Not Found
install the driver <7-Select SCI Driver>
after install the driver, we can read flash file. Now, dragon successfully reads.
]"]404 Not Found
Good Luck Dragon UsersDon't losse Hope, you never know tomorrow what will bring to for u
Comment
-
how to Made the MTK driver support your MTK Phone
some problem for the MTK stuep the driver
I sure the Mobile is MTK CPU,and in the driver install I has select the MTK Driver
but still error,and can't install it
how to solve??? read this!!!!
sample with windows XP(x86) system
first,we open the mtk driver inf file"usb2ser_2kXP.inf"
The device manager show you the driver name!
now we can add the new driver info support the mtk phone hardware
add the driver pid and vid to the info file
after save the inf file,and install the driver again,finishDon't losse Hope, you never know tomorrow what will bring to for u
Comment
-
How to change SPD 6820 / 8810 Andorid 4 IMEI Without Root and few Click
How to change SPD 6820 / 8810 Andorid 4 IMEI Without Root and few Click (Mobile PHone N9300)
Read Info
]"]404 Not Found
Format User Data
]"]404 Not Found
How to change SPD 6820/8810 Andorid 4 IMEI Without Root and few Clicks
1. Open SPD Tab.
2. Connect the mobile with Dragon Main Cable and + and - power cable with it (No Battery)
3. Tick "Scan Pinout"
4.Choose "Write IMEI"
5. Choose "6820 Android" Boot
6. Choose "USB"
7.Start
8. Wait Yellow line when it becomes 100% and IMEI Box becomes Green and opens for IMEI write
]"]404 Not Found
]"]404 Not Found
9. Fill the Correct IMEI that is printed on the Mobile Housing
]"]404 Not Found
10. Click On "Write IMEI" and Wait
11. Wait for message "Write (IMEI) to Mobile Done"
]"]404 Not Found
12. Restart Your mobile and check the IMEI using keys *#06#
13. Done
We do not believe in Faith, Miracle etc, We believe in Work and we believe in GPG Dragon
Don't losse Hope, you never know tomorrow what will bring to for u
Comment
-
Windwos 7 / 8 Box Driver, Box firmware and Device (Mobile) Drivers
This Is Last Driver Update;more stable support your Box(all with Pl2303 IC Driver)
Click Download Pl2303 V1.8.0 Driver in 4shared
4shared.com - free file sharing and storage
PL2303_Prolific_DriverInstaller_v1.8.0Don't losse Hope, you never know tomorrow what will bring to for u
Comment
-
How to change 625a CPU IMEI with USB Cable with Dragon box?
How to change 625a CPU IMEI with USB Cable with Dragon box?
1.Select "MTK"
2.Select "Write IMEI"
3.Mobile option "COM" switch to "USB"
4.Click "Start"
5. Now, Insert Battery to the mobile and Connect USB Cable to the Computer
6. Now, software shows you Original IMEI
7. Write any valid IMEI to the software's IMEI Box
8.Click "write imei"
9. DoneDon't losse Hope, you never know tomorrow what will bring to for u
Comment
-
How to remove Password from Mstar CPU (Phone) ?
How to remove Password from Mstar CPU (Phone) ?
This function makes the flash file passwordless. This means when you use this option, then, Dragon removes the password and saves new passwordless file to the computer. Now, you have to write this file to the mobile again.
1. Open the Dragon software
2. Click on "CheckBox"
3. Now, go to "Mstar" Tab
4. Choose option as "Read Password"
5. After this, you will see a box called "Clear_code". Tick the "Clear_Code"
6. Now, Choose the file name you want to save.
7. Click "Start"
8. Wait until the flash file is fully read by Dragon Box
9. Now, you need Write this Flash File File to the Device
10. Wait until the flash file written.
11. Done. Now, your device is passwordless
Don't losse Hope, you never know tomorrow what will bring to for u
Comment
-
How to Spice M5460 MT6250/20 Touch Pad Calibration With the help of Dragon Box
How to Spice M5460 MT6250/20 Touch Pad Calibration With the help of Dragon Box
1. Open Dragon Old Version Software 2.13
2. Connect Box
3. Choose "Tracker" Choose "Boot Version" and Click "Start"
]"]404 Not Found
4. Press and Hold Power button until software tells you to release.
5. Now, Choose "Restore Settings"
]"]404 Not Found
6. Click on "Restore"
]"]404 Not Found
7. Now, Choose Calibration Data "6253.cci" and Click on "Open"
8. Software shows you error but don't worry, it works.
]"]404 Not Found
9. Again Click on "Restore"
10. Choose Calibration Data "calibration titan.cci" and Click on "Open"
11. software shows you an error but doesn't matter, it works.
12. Again Click on "Restore"
13. Once more time, Choose Calibration Data "MTK6225.cci"
14. software shows you an error but doesn't matter, it works.
15. Again Click on "Restore"
16. Finally, Choose Calibration Data "MTK 6223.cci" and Click on "Open"
17. software shows you an error but doesn't matter, it works.
18. Done.
Video Tuterial + Touch CCI file Download Link:
Touch Data + Video With Dragon
NOTE: No need to do all the data at the same time because touch data can hang the mobile and not function the touch even you calibrate it. I did it because Customer wants to see the functional Screen or needs new mobile from my site. Because it was happened when I reset the mobile and could not calibrate from any other devices.Don't losse Hope, you never know tomorrow what will bring to for u
Comment
-
HOW TO WRITE IMEI of MTK ANDROID MOBILE 6575 etc.
HOW TO WRITE IMEI of MTK ANDROID MOBILE 6575 etc.
1. Power ON the device (Mobile)
2. Tick "Development" Option.
3. Now, Switch the mobile Off
4. Take out the battery and re-install the battery to the device.
6. Now, Open Dragon Software
7. Choose Dragon Box Port
8. CheckBox (Box Connects in Specif port)
9. Un-tick "Scan Pinout" If you are doing with USB cable + Battery
10. Choose "Write IMEI" in MTK tab
11. Choose "USB" (not COM)
12. Tick "Android IMEI"
13. Click "Start"
14. Wait and let the mobile install necessary drivers.
15. Now, you can see, yellow lines running in the button. Wait until it finish 100%
16. Now, IMEI Box Opens in Blue colour.
17. Write the IMEI that is written in the mobile housing.
18. Click "Write"
19. Now, Connect the USB cable to the Computer
20. Waits until you see "Successfully Done"
21. Done
.
.Don't losse Hope, you never know tomorrow what will bring to for u
Comment
-
HOW TO Remove Pattern Lock of SPD Android Mobiles ie SPD 6820/8810.
HOW TO Remove Pattern Lock of SPD Android Mobiles ie SPD 6820/8810.
BATTERY + USB Cable Way
1. Switch the mobile Off
2. Take out the battery and re-install the battery to the device.
3. Now, Open Dragon Software
4. Choose Dragon Box Port
5. CheckBox (Box Connects in Specif port)
6. Go to "SPD" Tab
7. Un-tick "Scan Pinout" If you are doing with USB cable + Battery
8. Choose "Format"
9. Choose Mobile Option "6820_Android"
10. Choose Use Option as "Format"
11. Tick "Format_UserData" (DO NOT Select Format_RuntimeNV, Format_Cache, Format_Misc)
12. Choose "USB" (not COM)
13. Click "Start"
14. Now, Press the Boot Key and Connect the mobile to the computer with the help of USB Data Cable.
Note: Boot Key might be Volume Down or Home Butten etc.
15. Wait and let the mobile install necessary drivers.
16. Waits until you see "All Done"
17. Done
]"]404 Not Found
MAIN CABLE and +/- of Main Cable Way (No Battery)
1. Switch the mobile Off
2. Connect the Mobile with the help of Dragon MAIN CABLE + DRAGON +/- wire (Not from Battery)
3. Now, Open Dragon Software
4. Choose Dragon Box Port
5. CheckBox (Box Connects in Specif port)
6. Go to "SPD" Tab
7. Tick "Scan Pinout" If you are doing with USB cable + Battery
8. Choose "Format"
9. Choose Mobile Option "6820_Android"
10. Choose Use Option as "Format"
11. Tick "Format_UserData" (DO NOT Select Format_RuntimeNV, Format_Cache, Format_Misc)
12. Choose "USB" (not COM)
13. Now, Press the Boot Key and Click on "Start".
Note: Boot Key might be Volume Down or Home Butten etc.
14. Waits until you see "All Done"
15. DoneDon't losse Hope, you never know tomorrow what will bring to for u
Comment
-
HOW TO Remove Pattern Lock of MTK Android Mobiles ie MTK 6575 etc.
HOW TO Remove Pattern Lock of MTK Android Mobiles ie MTK 6575 etc.
BATTERY + USB Cable Way
1. Switch the mobile Off
2. Take out the battery and re-install the battery to the device.
3. Now, Open Dragon Software
4. Choose Dragon Box Port
5. CheckBox (Box Connects in Specif port)
6. Go to "MTK" Tab
7. Un-tick "Scan Pinout" If you are doing with USB cable + Battery
8. Choose "Format"
9. Tick "Auto Format" if you don't know the Manual Format Address
10. Choose "USB" (not COM)
11. Click "Start"
12. Now, Press the Boot Key and Connect the mobile to the computer with the help of USB Data Cable.
Note: Boot Key might be Volume Down or Home Button etc.
13. Wait and let the mobile install necessary drivers.
14. Waits until you see "All Done"
15. Done
MAIN CABLE and +/- of Main Cable Way
1. Device must be ticked "Development" Option.
2. Connect Mobile with GPG Dragon Main Cable and +/- Cable from Main Cable (for power supply)
3. Now, Open Dragon Software
4. Choose Dragon Box Port
5. CheckBox (Box Connects in Specif port)
6. Go to "MTK" Tab
7. Tick "Scan Pinout" If you are doing with Main Cable + Dragon Cable Power Supply (NO Battery)
8. Choose "Format"
9. Tick "Auto Format" if you don't know the Manual Format Address
10. Choose "USB" (not COM)
11. Now, Press the Boot Key and Click on "Start"
Note: Boot Key might be Volume Down or Home Button etc.
12. Wait and let the mobile install necessary drivers.
13. Waits until you see "All Done"
14. DoneDon't losse Hope, you never know tomorrow what will bring to for u
Comment
-
How to Repair MTK IMEI With USB Method ??
How to Repair MTK IMEI With USB Method
WIth the help of Dragon Main Cable + Main cable Power supply (Do not use Battery )
1. Open the Dragon Software
2. Choose "MTK" tab
3. Tick "Scan Pinout"
4. Choose "USB" (NOT COM Port)
5. Now, Connect the Device With Dragon MAIN CABLE and its power cable (NOT Battery and USB cable)
6. Click on "Start"
7. Wait until the Yellow mark goes to 100% and turn Green
8. Write Valid IMEI
9. Click on "Write IMEI"
10. Wait until IMEI Written.
Done
WIth the help of USB Cable and Battery (Do not use Dragon Main Cable and Power supply)
1. Open the Dragon Software
2. Choose "MTK" tab
3. Untick "Scan Pinout"
4. Choose "USB" (NOT COM Port)
5. Click on "Start"
6. Insert Battery + USB Cable and now connect to the computer
7. Wait until the driver installed
8. Now you will see Yellow mark goes upto 100% and it turns Green
9. Write Valid IMEI
10. Click on "Write IMEI"
11. Wait until IMEI Written.
Done
NOTE: Sometimes you must ON Device, and choose Device Diagnostics Port to repair IMEI.
STILL IMEI NOT CHANGING WHAT IS THE PROBLEM?
Sometimes You changed the IMEI of 6252 (MTK) using Dragon Box, Still IMEI not changing, in such a case, follow the methods:
1. Backup the flash file of the mobile
2. Save it to the hard disk or portable device
3. Write it back to the Device (Mobile)
4. Check the IMEI
5. Done
Please USE only USB Method. COM method not supported yet.
Don't losse Hope, you never know tomorrow what will bring to for u
Comment
-
-
Dragon Old Version
Version 26
gpg dragon v.3.26
Version 3.33
4shared.com - free file sharing and storage
Box Firmware
File sharing and storage made simple
How to Upgrade Box Firmware
Click to View - How to upgrade Dragon Firmware
How to solve the Problem of Updating the Box firmware
Just a moment...Don't losse Hope, you never know tomorrow what will bring to for u
Comment
Comment