sm-t211 EMMC test

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.31V, SD_CLK Frequency is 2 MHz

Memory Type .......................... eMMC
Manufacturer ID ...................... 0x00
OEM/Application ID ................... 0x00
Product Name ......................... " "
Package .............................. Removable
User Area Parition Size .............. 0x000000000004 Bytes (0.00 KB)
OCR Register ......................... 0x00000000 (High Voltage)
Write Protection Bits ................ NONE
Chip Revision ........................ 0.0
Multimedia Card Revision ............. 1.0 (eMMC v4.0)
Serial Number ........................ 0x00000000
Memory Manufacturing Date ............ January, 1997

this not connect

You need to use either emmc adapter or external vccq(1.8v).

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.1b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.31V, SD_CLK Frequency is 727 KHz

Memory Type .......................... eMMC
Manufacturer ID ...................... 0x15
OEM/Application ID ................... 0x00
Product Name ......................... "M8G1WA"
Package .............................. BGA
User Area Parition Size .............. 0x0001D2000000 Bytes (7.28 GB)
Boot Partition Size .................. 0x000000200000 Bytes (2.00 MB)
RPMB Partition Size .................. 0x000000020000 Bytes (128.00 KB)
OCR Register ......................... 0xC0FF8080 (Dual Voltage, High Capacity)
Write Protection Bits ................ NONE
Boot Configuration ................... Boot from Boot Partition 1 (Bus Width = 4Bit)
Chip Revision ........................ 0.0
Multimedia Card Revision ............. 1.5 (eMMC v4.41)
Serial Number ........................ 0x28D39071
Memory Manufacturing Date ............ December, 2013

Dumps from the dead plate to read perfectly.

We need to try to revive him.

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.1b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.31V, SD_CLK Frequency is 727 KHz

Detected eMMC Chip, ID: 0x15/0x00 (M8G1WA), User Area Partition = 0x0001D2000000 Bytes (7.28 GB)

Reading "User Area Partition" address space from 0x000000000000 to 0x0000007FFFFF
Completed in 00:01:48.062 (Average Transfer Rate: 75.81 kB/s)

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.1b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.31V, SD_CLK Frequency is 727 KHz

Detected eMMC Chip, ID: 0x15/0x00 (M8G1WA), User Area Partition = 0x0001D2000000 Bytes (7.28 GB)

Reading "Boot Area Partition 2" address space from 0x000000000000 to 0x0000001FFFFF
Completed in 00:00:27.004 (Average Transfer Rate: 75.84 kB/s)

[Attachment: user.rar]

[Attachment: Boot_Area_Partition_1_read.rar]

[Attachment: Boot_Area_Partition_2_read.rar]

[Attachment: RPMB_read.rar]

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.1b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.31V, SD_CLK Frequency is 2.50 MHz

Detected eMMC Chip, ID: 0x15/0x00 (M8G1WA), User Area Partition = 0x0001D2000000 Bytes (7.28 GB)

Reading "Boot Area Partition 1" address space from 0x000000000000 to 0x0000001FFFFF
Completed in 00:00:10.421 (Average Transfer Rate: 196.53 kB/s)

Try these two:

[Attachment: SM-T211_Alive_New_BN.rar]

Legija wrote:

Try these two:

Unfortunately for writing software hangs and does not write anything.

Green LED (DATA) does not blink

Lower down the frequency. By all means it should work if connection is okay, and chip, of course.

Write only ROM1 to User Partition for start.

Legija wrote:

Lower down the frequency. By all means it should work if connection is okay, and chip, of course.

Write only ROM1 to User Partition for start.

first record 0x200, and the other is not (((

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.1b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.31V, SD_CLK Frequency is 421 KHz

Detected eMMC Chip, ID: 0x15/0x00 (M8G1WA), User Area Partition = 0x0001D2000000 Bytes (7.28 GB)

Writting "User Area Partition" memory from 0x000000000000 to 0x0000000001FF
Completed in 00:00:00.016 (Average Transfer Rate: 31.25 kB/s)

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.1b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.31V, SD_CLK Frequency is 421 KHz

Detected eMMC Chip, ID: 0x15/0x00 (M8G1WA), User Area Partition = 0x0001D2000000 Bytes (7.28 GB)

Writting "User Area Partition" memory from 0x000000000000 to 0x0000000003FF
ERROR: DCC Loader has reported Error Code = 0x63 (0x00001B). Trying to recover...OK
ERROR: Timeout while waiting for eMMC/SD Write Response. Trying to recover...OK

And whats the history of tab, how it got dead ? This could be problem with chip, or some bug in software, but it's hard to tell from available info.

Writting "Boot Area Partition 1" SM-T211_Rom2_Alive_BN.bin

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.2b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.31V, SD_CLK Frequency is 585 KHz

Detected eMMC Chip, ID: 0x15/0x00 (M8G1WA), User Area Partition = 0x0001D2000000 Bytes (7.28 GB)

Writting "Boot Area Partition 1" memory from 0x000000000000 to 0x0000001FFFFF
Completed in 00:00:36.738 (Average Transfer Rate: 55.75 kB/s)

Reading "Boot Area Partition 1" SM-T211_Rom2_Alive_Read.bin

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.38.2b, JTAG Manager Version: 1.57 [BETA 2]

Connecting to the SD/eMMC Card...OK
Set I/O Voltage reads as 3.31V, SD_CLK Frequency is 960 KHz

Detected eMMC Chip, ID: 0x15/0x00 (M8G1WA), User Area Partition = 0x0001D2000000 Bytes (7.28 GB)

Reading "Boot Area Partition 1" address space from 0x000000000000 to 0x0000001FFFFF
Completed in 00:00:21.295 (Average Transfer Rate: 96.17 kB/s)

Compared that recorded in the plate and everything is normal ))))

[Attachment: IMG_20160204_114624.jpg]

[Attachment: IMG_20160204_114635.jpg]

[Attachment: IMG_20160204_114726.jpg]

Samsung T211 works fine.

[Attachment: IMG_20160204_125417.jpg]

[Attachment: IMG_20160204_125815.jpg]

[Attachment: IMG_20160204_130902.jpg]

omg please please tell me did I just see you have the device connected to the rj45 how did you do this please reply I am a total noob no one could give me a answer!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Sedy wrote:

Writting "Boot Area Partition 1" SM-T211_Rom2_Alive_BN.bin

Reading "Boot Area Partition 1" SM-T211_Rom2_Alive_Read.bin

Compared that recorded in the plate and everything is normal ))))