Htc one resurrection problem.

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.54
Selected Resurrector: [HTC OneM7 (PN0710000) V1.0.4926.46931]
Connecting to the dead body...OK
Detected dead body ID: 0x207150E1 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...FAILED
ERROR: No response from the RIFF Box.

all wires and battery check but problem same.

1. Install JTAG Manager v 1.55
2. Set RTCK to 1MHz
3. Check all the wires.

htc one

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [HTC OneM7 (PN0710000) V1.0.4926.46931]
Connecting to the dead body...OK
Detected dead body ID: 0x207150E1 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is 1 MHz
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...FAILED
ERROR: Wrong DCC data length received.

This is bad connection, resolder all the wires.
You may also need to restart PC if You use Win Xp.

Htc one

[Attachment: #10767]

all wries ok and check ...m use win7

can i write dump file on 801-n ---- 801-e.

PHONE

Those wires are too long.
As for dump write - it's not brightest idea, because You may damage security and put phone into IMSI Lock forever.
It's important not to rewrite PGFS and ID partitions.

Htc one

SIR ...THESE WRIES length 10 CM ........SO ANY SULOTION FOR THIS PROBLEM WHAT CAN I DO?

HTC One M7 UL AT&T PN07120

hey, um uh sorry for my abrasiveness! know where i can get Dump/Resurrection files for the "HTC One M7 UL AT&T PN07120"......?

ahsan007 wrote:

SIR ...THESE WRIES length 10 CM ........SO ANY SULOTION FOR THIS PROBLEM WHAT CAN I DO?

May be it's a hardware problem i think. Sometime i get this error too and it could be fixed by change emmc chip :frown2:

Htc one

M check emmc by easy jtag .......read and write..soon!!!