HTC One M7 Qualcomm Hs Usb Qd Loader 9008

Hi guys,

the phonen only connects with this deviceid.

I can read jtag chain, but no resurrection.....have you got an idea??

BIT THX TO YOU

duke

You should post logs here.

lol, certainly, sorry for this mistake.

here are the logs from the riffbox, if I use the DroidDNA Resurrection instead of the One M7, the resurrection data can be uploaded to the phone, but the phone still stay in the QUSB Mode. Yesterday, I did try to build a download file for the Qualcomm Mode but I didn't extract oll the needed files (*.mbn) for the Hex Dump.

[05.08.2013 07:41:44] [START OPERATION_ID = RESURRECT]
[05.08.2013 07:41:55] Open serial port...OK
[05.08.2013 07:41:55] Connecting to the RIFF Box...OK
[05.08.2013 07:41:55] Firmware Version: 1.36, JTAG Manager Version: 1.50
[05.08.2013 07:41:55] Selected Resurrector: [HTC OneM7 (PN0710000) V1.0.4926.46931]
[05.08.2013 07:41:55]
[05.08.2013 07:41:55] Connecting to the dead body...OK
[05.08.2013 07:41:55] Detected dead body ID: 0x207150E1 - CORRECT!
[05.08.2013 07:41:55] Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
[05.08.2013 07:41:55] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[05.08.2013 07:41:55]
[05.08.2013 07:41:55] Resurrection sequence started.
[05.08.2013 07:41:55] Establish communication with the phone...FAILED
[05.08.2013 07:41:55] ERROR(0x42): Communication is not established. Terminating.
[05.08.2013 07:41:55] [FINISH OPERATION_ID = RESURRECT]

[04.08.2013 23:24:24] [START OPERATION_ID = READ_ICE_REGS]
[04.08.2013 23:24:24] Open serial port...OK
[04.08.2013 23:24:24] Connecting to the RIFF Box...OK
[04.08.2013 23:24:24] Firmware Version: 1.36, JTAG Manager Version: 1.50
[04.08.2013 23:24:24] Selected Resurrector: [HTC OneM7 (PN0710000) V1.0.4926.46931]
[04.08.2013 23:24:24]
[04.08.2013 23:24:24] Getting EmbeddedICE-RT registers...OK
[04.08.2013 23:24:24] 00 = 0x00000005 08 = 0x00000000 10 = 0x00000000
[04.08.2013 23:24:24] 01 = 0x00000000 09 = 0x00000000 11 = 0x00000000
[04.08.2013 23:24:24] 02 = 0x00000000 0A = 0x00000000 12 = 0x00000000
[04.08.2013 23:24:24] 03 = 0x00000000 0B = 0xFFFFFFFF 13 = 0xFFFFFFFF
[04.08.2013 23:24:24] 04 = 0x70000000 0C = 0x00000000 14 = 0x00000000
[04.08.2013 23:24:24] 05 = 0x00000000 0D = 0x000000F7 15 = 0x000000F7
[04.08.2013 23:24:24] 06 = 0x00000000 0E = 0x00000000 16 = 0x00000000
[04.08.2013 23:24:24] 07 = 0x00000000 0F = 0x00000000 17 = 0x00000000
[04.08.2013 23:24:24] [FINISH OPERATION_ID = READ_ICE_REGS]

[04.08.2013 22:39:41] [START OPERATION_ID = RESURRECT]
[04.08.2013 22:39:54] Open serial port...OK
[04.08.2013 22:39:54] Connecting to the RIFF Box...OK
[04.08.2013 22:39:54] Firmware Version: 1.36, JTAG Manager Version: 1.50
[04.08.2013 22:39:54] Selected Resurrector: [HTC Droid DNA (PL8320000) V1.0.4926.47214]
[04.08.2013 22:39:54]
[04.08.2013 22:39:54] Connecting to the dead body...OK
[04.08.2013 22:39:54] Detected dead body ID: 0x207150E1 - IGNORED!
[04.08.2013 22:39:54] Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
[04.08.2013 22:39:54] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[04.08.2013 22:39:54]
[04.08.2013 22:39:54] Resurrection sequence started.
[04.08.2013 22:39:54] Establish communication with the phone...OK
[04.08.2013 22:39:54] Initializing internal hardware configuration...OK
[04.08.2013 22:39:54] Uploading resurrector data into memory...OK
[04.08.2013 22:39:54] Starting communication with resurrector...OK
[04.08.2013 22:39:54]
[04.08.2013 22:39:54] Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (MBG4GA, 0x000747C00000 Bytes = 29.12 GB)
[04.08.2013 22:39:54] Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (MBG4GA, 0x000000200000 Bytes = 2.00 MB)
[04.08.2013 22:39:54]
[04.08.2013 22:39:54] Flashing the dead body...OK
[04.08.2013 22:39:54] Resurrection complete!
[04.08.2013 22:39:54] [FINISH OPERATION_ID = RESURRECT]

This is the USB-Device within the phone connects....

Qualcomm HS-USB QDLoader 9008
USB\VID_05C6&PID_9008\5&134366e7&0&3

thank you guys

Hi,You've set IGNORE ID option by purpose ? The MCU ID in this phone is not same as the one from DLL ?

for the DrainDroid DLL I set to Ignore the ID, yes, otherweise the resurrection didn't start. But this is not the problem why the correct DLL (One M7) dont runs.

Ok,

Please download remote helper , and contact me via ICQ or Sonork, I'll need to take look.

very nice, asap