Renault master radio code

Papaman wrote:

Can you help me with a code for security number R754
RNRDAW80326196
RENRDW300-00

Regards Patrik

try code 8271

Hi not sure if Iam posting new thread or not (bit new to this!). I have just bought a Renault master 2007 converted as a horsebox. I think I need a code for the radio (it must have been diconnected during the refit) but don't know how to get the numbers that everyone is posting to get a code. Can anyone help? thanks (ps there is no code anywhere in the documentation)

dougal wrote:

Hi not sure if Iam posting new thread or not (bit new to this!). I have just bought a Renault master 2007 converted as a horsebox. I think I need a code for the radio (it must have been diconnected during the refit) but don't know how to get the numbers that everyone is posting to get a code. Can anyone help? thanks (ps there is no code anywhere in the documentation)

The radio has to be removed from the dashboard

Then post the 14 character SERIAL NUMBER beginning with
RN* * * * * * * * * * * * found stamped in the metal casing.

Also post the SECURITY NUMBER. This is found on a label on the metal casing in the format TOA123 or TA123 or just A123 at the end of a barcode

If in doubt post ALL the letters+numbers on any labels or barcodes

urr hate to sound blond, but how do I get the radio out of the dash? :-)

dougal wrote:

urr hate to sound blond, but how do I get the radio out of the dash? :-)

Here is a video showing how to remove a standard radio from the dashboard.
A pair of extractors are required (available from Ebay etc ) but these can be made from 2 pieces of bent, wire coat-hanger or 4 small drills(using the blunt end) or 4 small Allen Keys or 4 small screwdrivers or 4 nails or even 4 darts.

An assistant is useful to pull the radio out whilst you are releasing the 4
securing clips

http://www.youtube.com/watch?v=urC-4NbXvDQ

note: on some radios , these 4 holes are protected by 4 small screws. These
can be unscrewed using the appropriate size of Allen key.

thanks

have made a couple of "extractors" from a coat hanger and will try tomorrow. many thanks for your help so far!

numbers on radio

well, here they are:
8200633634T
V967 security
RNRDAW71096459
RENRDW300-00
FD0507210196359

really hope you can help - think my horse is sick of me singing to him ;-)

dougal wrote:

well, here they are:
8200633634T
V967 security
RNRDAW71096459
RENRDW300-00
FD0507210196359

really hope you can help - think my horse is sick of me singing to him ;-)

code 4020

many thanks - will give it a go tomorrow

Hi looking for a code for Renault master 2003 100 dci

Numbers are

22dc279/62
Tb520
Rn279f30257870
Fd0703440257870
7700433948tb520

Thanks in advance

Gordy wrote:

Hi looking for a code for Renault master 2003 100 dci

Numbers are

22dc279/62
Tb520
Rn279f30257870
Fd0703440257870
7700433948tb520

Thanks in advance

try code 0454

dougal wrote:

many thanks - will give it a go tomorrow

sorry for late response. the code you suggested didn't work. do you have any other suggestions? many thanks

dougal wrote:

sorry for late response. the code you suggested didn't work. do you have any other suggestions? many thanks

please check your security code.
You must hold at the end to store your code.
IF YOU DONT HAVE ¬ KEY THEN PUSH THUMBWHEEL IN AND SOME HAVE {A¬} KEY

Turn on the radio and the display will show 'CODE'
Use the steering controls for code entry.
Press the [ ¬] button then rotate the thumb wheel for the correct first digit
Press the [ ¬] button then rotate the thumb wheel for the correct second digit
Press the [ ¬] button then rotate the thumb wheel for the correct third digit
Press the [ ¬] button then rotate the thumb wheel for the correct fourth digit
If the correct code is now shown on screen,
press and hold the [ ¬] button for up to 10 seconds to store the code

FOR NO STEERING CONTROL
press the first preset button for the 1st digit,
second button for the 2nd digit
third button for 3rd digit
forth button for 4th digit
then press and HOLD button 6 to store. for 10 seconds

and on some it's hold 5 to store.

hay88 wrote:

please check your security code.
You must hold at the end to store your code.
IF YOU DONT HAVE ¬ KEY THEN PUSH THUMBWHEEL IN AND SOME HAVE {A¬} KEY

Turn on the radio and the display will show 'CODE'
Use the steering controls for code entry.
Press the [ ¬] button then rotate the thumb wheel for the correct first digit
Press the [ ¬] button then rotate the thumb wheel for the correct second digit
Press the [ ¬] button then rotate the thumb wheel for the correct third digit
Press the [ ¬] button then rotate the thumb wheel for the correct fourth digit
If the correct code is now shown on screen,
press and hold the [ ¬] button for up to 10 seconds to store the code

FOR NO STEERING CONTROL
press the first preset button for the 1st digit,
second button for the 2nd digit
third button for 3rd digit
forth button for 4th digit
then press and HOLD button 6 to store. for 10 seconds

and on some it's hold 5 to store.

OK, so I tried again and it said "code error" and started to do a countdown. I checked the numbers on the side of the radio and I'm not sure if it says V967 or U967 for security code. Also, the number starting FD should be 0507210196459 (wrong number supplied before - could that make a difference?). Sorry to be pain and thanks for all your help ps I have the [ ¬] button and the thumb wheel system but my instruction book said to press 6 to store the code

dougal wrote:

OK, so I tried again and it said "code error" and started to do a countdown. I checked the numbers on the side of the radio and I'm not sure if it says V967 or U967 for security code. Also, the number starting FD should be 0507210196459 (wrong number supplied before - could that make a difference?). Sorry to be pain and thanks for all your help ps I have the [ ¬] button and the thumb wheel system but my instruction book said to press 6 to store the code

V967 = 4020

U967 = 5023

You have been given both of the instructions for entering the code.(remote steering or direct with either Button 5 or Button 6 to store the code)

Make sure you press Button 6 for at least 10 seconds to store the code

thanks, will try both those numbers when I am next in the horsebox. thanks for your patience!

hurrah

hi RegWorts and hay88 - you are both fab. The security code did begin with U (not V) and the radio code you provided worked a treat. very many thanks. Don't know how you do it but I am really grateful
all the best from happy driver and horse!

I've recently had my own personal CD player in my Clio but it has packed up so I am now re-installing the original to my car but requires a code, I've had the car for over 7 years so trying to find paperwork with codes on? Ha! Yeah right.......please help 🙂

Model No - 22DC278 / 62B

Prod No - FD0202120161698

bencuro wrote:

I've recently had my own personal CD player in my Clio but it has packed up so I am now re-installing the original to my car but requires a code, I've had the car for over 7 years so trying to find paperwork with codes on? Ha! Yeah right.......please help 🙂

Model No - 22DC278 / 62B

Prod No - FD0202120161698

Sorry.......this is insufficient information

The radio has to be removed from the dashboard

Then quote the 14 character SERIAL NUMBER beginning with
RN* * * * * * * * * * * * found stamped in the metal casing.

Also quote the SECURITY NUMBER. This is found on a label on the metal casing in the format TOA123 or TA123 or just A123 at the end of a barcode

If in doubt post ALL the letters+numbers on any labels or barcodes

regworts wrote:

sorry.......this is insufficient information

the radio has to be removed from the dashboard

then quote the 14 character serial number beginning with
rn* * * * * * * * * * * * found stamped in the metal casing.

Also quote the security number. This is found on a label on the metal casing in the format toa123 or ta123 or just a123 at the end of a barcode

if in doubt post all the letters+numbers on any labels or barcodes

rn278f20161698

toc694