Radio code needed for a renault laguna

thanks so much for the quick reply! not been able to try yet because radio just showing 'CODE' and wont let me put any numbers in?!? Any ideas? Thanks again. really appreicate your time.

rne wrote:

thanks so much for the quick reply! not been able to try yet because radio just showing 'CODE' and wont let me put any numbers in?!? Any ideas? Thanks again. really appreicate your time.

It should show CODE

FOR CARS WITH A STEERING WHEEL REMOTE CONTROL

(Note :If you don`t have the [ ¬ ] button then push the thumbwheel in and some will have an [ A¬ ] button )

Turn on the radio and the display will show 'CODE'

Use the Steering Wheel Remote Controls for code entry.

Press the [ ¬] button then rotate the thumb wheel for the correct first digit
Press the [ ¬] button then rotate the thumb wheel for the correct second digit
Press the [ ¬] button then rotate the thumb wheel for the correct third digit
Press the [ ¬] button then rotate the thumb wheel for the correct fourth digit

If the correct code is now shown on screen,
press and hold the [ ¬] button for up to 10 seconds to store the code

IF THERE IS NO STEERING WHEEL CONTROL , THEN USE THE PRESET BUTTONS ON THE RADIO

Press the First Preset Button repeatedly for the 1st digit to be displayed
Press the Second Preset Button repeatedly for the 2nd digit to be displayed
Press the Third Preset Button repeatedly for 3rd digit to be displayed
Press the Fourth Preset Button repeatedly for 4th digit to be displayed

Then press and HOLD Preset button 6 for 10 seconds to store your code

(Note :Some radios use Preset Button 5 to store the code )
​============================================================

Thanks but tried again and all i'm getting is 'code' and when i try and press any buttons, including the all wheel controls, it just beeps. cant put numbers in. any ideas???

Thanks.

Birdie83 wrote:

Thanks but tried again and all i'm getting is 'code' and when i try and press any buttons, including the all wheel controls, it just beeps. cant put numbers in. any ideas???

Thanks.

If the steering wheel remote is being used make sure it is plugged in fully.

Otherwise it looks as though your radio may be faulty

It is because wrong codes have already been entered, just leave the set powered up, it will unlock by its self and let you enter the code.
Each wrong code make the time you have to wait double every time i.e. 1 min, 2 mins, 4 mins, 8 mins, so on 16, 32, etc
If after 2 code entries it still locks out the code is wrong and may have been changed, in this case you will have to seek out your local radio decoder.

thanks very much for all your help. i will leave it on for a while and cross fingers. i will get it sorted one way or another.

Thanks again.

Hi newbie here,just purchased a laguna estate 2003 but radio needs code,hopefully someone can help me.
MODEL RENRDW 100-10
TON565 RNRD0130073373
PROD NO. FD0003240073373
8200247962 TN565

It does have another sticker on the top saying RADIO CODE 7962 but ive tried that and that doesnt work.
Thanks in advance

Cesar wrote:

Hi newbie here,just purchased a laguna estate 2003 but radio needs code,hopefully someone can help me.
MODEL RENRDW 100-10
TON565 RNRD0130073373
PROD NO. FD0003240073373
8200247962 TN565

It does have another sticker on the top saying RADIO CODE 7962 but ive tried that and that doesnt work.
Thanks in advance

code 2400

That was a quick reply!
I'll try it asap.Thanks again

Please help me with a code for radio cd laguna 2....RN279F20262680 - i guess serial no.
22DC279/62Z - don't know what is -8200002607 - barcode
TN100

jojoja1 wrote:

Please help me with a code for radio cd laguna 2....RN279F20262680 - i guess serial no.
22DC279/62Z - don't know what is -8200002607 - barcode
TN100

try code 2 8 7 1

not good 2871

cosmy_kom wrote:

not good 2871

8200002607TN100 = 2871

Code Entry as Follows:

Switch Radio On - Display Shows
" 0000 " with the 1st digit flashing
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
If the correct code number is now shown
Press And Hold " ¬ " (up to 10 seconds) Until A Beep Is Heard

still not good......

Kazzzek wrote:

still not good......

please check TN100

You must hold at the end to store your code.
IF YOU DONT HAVE ¬ KEY THEN PUSH THUMBWHEEL IN AND SOME HAVE {A¬} KEY

Turn on the radio and the display will show 'CODE'
Use the steering controls for code entry.
Press the [ ¬] button then rotate the thumb wheel for the correct first digit
Press the [ ¬] button then rotate the thumb wheel for the correct second digit
Press the [ ¬] button then rotate the thumb wheel for the correct third digit
Press the [ ¬] button then rotate the thumb wheel for the correct fourth digit
If the correct code is now shown on screen,
press and hold the [ ¬] button for up to 10 seconds to store the code FOR NO STEERING CONTROL
press the first preset button for the 1st digit,
second button for the 2nd digit
third button for 3rd digit
forth button for 4th digit
then press and HOLD button 6 to store. for 10 seconds

and on some it's hold 5 to store.

oh sorry

For laguna 2

the model nr is 22DC279/62Z
T0N100 (instead of tn100 )
RN279F20262680
PROD NR: FD02021502150262680

8200002607TN100

hi i have a renault scenic radio 22dc259/62p
tok595
rn259f10233942
fd0501080233942
7700434424 tk595
and i left lights on until battery when flat and now i need the code... can anyone help?

chris2810 wrote:

hi i have a renault scenic radio 22dc259/62p
tok595
rn259f10233942
fd0501080233942
7700434424 tk595
and i left lights on until battery when flat and now i need the code... can anyone help?

code 4900

cosmy_kom wrote:

For laguna 2

the model nr is 22DC279/62Z
T0N100 (instead of tn100 )
RN279F20262680
PROD NR: FD02021502150262680

8200002607TN100

8200002607TN100 = still code 2871

hay88 that worked thanks very much!!!!!