help!!! 2 x ku990I dead after attempted unlock

here manual how to .
full charger battery .

thank you !! will try again tommorrow, have learned a lot!! i have plugged charger into phone in emergency mode hope this will charge battery.

If You spend 30 seconds to read release anouncement, You could see this :

**Important !

- When unlocking new phones (Year 2009) in some cases phone might have cached data in NAND, hence producing hang problem after first unlocking stage.
To resolve this, just leave phone connected and wait aprox. 30 seconds before pressing "Unlock" button again.**

thank you legija - less haste more speed. i followed advice and flashed with old software, but still wont unlock message:

Detecting phone...
Detected phone on COM47. Connecting...OK
Firmware: KU990-MSM6280-V10a-JUL-23-2008-XX
Current mode: NORMAL

Qualcomm chipset: MSM6280
Preparing phone for booting...OK
Sending preloader into phone...
Error sending preloader. Terminating.
CRITICAL: Failed to upload ramloader.

any ideas??

still in trouble!!!

have downloaded flashfile but only "emergency ready" flashed phone twice but still only powering on in emergency mode. help plz..

Full flash your phone with thes file : KU990i-DZ-V10b-MAR-12-2009-OPN-EU
and write the Backup .
than unlock it :
Quote:
Important !

- When unlocking new phones (Year 2009) in some cases phone might have cached data in NAND, hence producing hang problem after first unlocking stage.
To resolve this, just leave phone connected and wait aprox. 30 seconds before pressing "Unlock" button again.

ku990i

how write backup??

when i power up phone i have yellow screen with "refreshing" on screen when i select dz file for flashing i get message " select ku990i image" and file wont open. phone still has ku990 software 23 jul 2008. plz help:nonod:

Tunisiano wrote:

how write backup??

in the software LG Rocker you have secund tab Backup Manage .
find the backup with the Imei for your phone select the NVM Backup and write it .

i have unlocked phone and done nvr restore, but i cannot write ku990i software when i click on connect in lgmdp it fills boxes automatically with 2008 software. when i browse and select dz file it wont accept.

wait i well upload for you one unpacked good flash file .

message i get is you cannot proggramme the xxxx without the partition table. there are many files in the ku990 2008 software but 2009 software only dz file??

wait 10 minute i well give the file to flash your phone

OK,
unpack thes rar file than unback all files in one folder .than select the folder
to flash your phone .

http://www.4shared.com/file/122196896/c3b103cb/KU990i-DZ-V10a3-FEB-23-2009-OPN-GB.html

file ..thanks. i think battery too low to do this now so will charge and try tommorrow

how do i flash with dz file? i browse image folder option and select file ku990i-dz-v10a+3-feb-23-2009-opn-gb.dz messages appear "you cannot programme the flexible logo image without the partition table" where do i get files for partition table, pri boot loader, qcsbl header, qcsbl, oemsbl header, oemsbl, amss modem image header, amss modem image and flexible logo?

sorry for ignorance, but lg is new to me, only used to nokia and se.

you need to unpack all files (gz) with winrar and but all in one folder ,
than select the folder for flash.

hi, i am not sure how to flash lg phones. i click on the advanced tab on lg rocker but i dont know how to access the flashfile i have downloaded from this screen. what is LGMDB flasher, is it hardware or software? i have lg rocker dongle.

i have downloaded dz file and extracted to one folder but it is only one file, unlike biaries folder which has all files. when i select dz file as image file it keeps asking for partition folder?

Please folow the Guide . and you can flash easy your phone .

can you forget all , and folow the guide

download the Guide :
http://www.4shared.com/file/122627393/6de77e69/KU990_Software_upgrade_guide.html

and Flash With thes file :

http://www.4shared.com/file/122633344/f42f2b60/KU990i-V10a3-FEB-23-2009-OPN-GB.html

that's all .