RegWorts
ramrap wrote:
Hi need to unlock CAR300D
Serial GM1300V4123117
Model 7647852320
NO 90532620also I was sold this unit but it was not as described. Is it possible to use it without a display and if so what sequence is the code inputted when you hit the various buttons. ie does it go 0,1,2,3.. or 1,2,3 ... 0 ?
Thanks in advance
Rish
Try code 1202
The first press of the button usually displays 0 so the sequence should be 0,1,2,3....... if you are entering it blind then ADD 1 to each button press for each digit of the code.
======================================================
Code Entry
Switch the ignition key ON
Press and hold AS button and the ON button at the same time
Display Shows SAFE then goes to 10 - - - - with a "Beep" from the speaker
Press Preset Button " 1 "repeatedly until the 1st Digit of your Code is displayed
Press Preset Button " 2" repeatedly until the 2nd Digit of your Code is displayed
Press Preset Button " 3" repeatedly until the 3rd Digit of your code is displayed
Press Preset Button " 4" repeatedly until the 4th Digit of your code is displayed
If the display now shows the correct Code number then
Press Button AS and hold to Enter and if successful there should be a "Beep" from the speaker and the radio should switch on