mzc1993 wrote:
Friend! when any phone disconnected during
any process (Unlock, or Flash) is necessary
repair this.Try make all again.You need put
Boot software in phone and finish all process.
BR
Hassan
Where can i find Boot software? How can i install it?
Hello
onlinecode wrote:
Hello,
I would like to know if this software supports Blackberry Flip 8220. I have some two pieces there that I would like to unlock them but I don't know if it supports it. Anyone tested it to confirm it to me with all respect.
Thanks in advance.
Friend! This software i think support all 8xxx Series.
But before try anything, think in this:
Black Berry is not Nokia DCT4.
Is necessary to have some knowledge in the area to unlock
without problem these Phones.
No is like this easy as many they think.
If you can try ok but! careful because you can destroy BB.
If you don't have practices is Better buy the Code.
BR
Hassan
Hello
[deleted] wrote:
Where can i find Boot software? How can i install it?
Friend! If you have Rocker Dongle
you can Download From Support.
BR
Hassan
Model
[deleted] wrote:
Where can i find Boot software? How can i install it?
Friend! Which is the Model that you want to unlock?
I see if i can Help you.
BR
Hassan
Oracle???
[deleted] wrote:
Hello,
When connect my blackberry to MFI loader it is asking for Oracle client software v.8.1.7 or greater.
Please help me to solve this particular problem.
speen
Friend! Anything is wrong with software.
Oracle don't have anything with this.
Try install all Softwre Step by Step and try
again unlock. But for unlock is not easy,
I advise you! This is not a Nokia phone.
If you don't make all correct you can damage
Phone.
BR
Hassan
[deleted] wrote:
Friend! If you have Rocker Dongle
you can Download From Support.
BR
Hassan
Sorry. I haven't got Rocker Dongle.....T_T..... Can you send it to me? Only bootsoftware and instructions. Thanks alot.
This is my email : p.nhatthanh87@gmail.com
I would like to finish getting this solution...i got most from the past but need the last few for MFI
Can someone tell me where to get it. and how?
[deleted] wrote:
Hello,
Thanks to person whom i cant remember nick, i was able to download BlackBerry unlock solution yesterday morning before it got erased from forum and rapidshare.
You can find it in Rocker Dongle support now.
Here's how it works:
- Install MFI setup
- Unpack all parts and copy to "C:\MML" - Overwrite all files there
- Install Desktop ManagerSimply run MFI loader from desktop shortcut, tick "erase" and "Autostart" and connect Your BlackBerry.
Once process is finished, Your BlackBerry device will show "1" in display. At this point, You just have to reflash firmware.
I have also uploaded some of the firmware packs, hope You'll enjoy it.Best Regards, and sorry to people who lose money on this.
Is necessary to flash with same firmware?Vodafone for Vodafone or work
any firmware?
thanks
br
[deleted] wrote:
I download all the package,Unpack all parts and copy to "C:\MML", but there was no MML folder there,so no overwriting. then I run MFI loader , tick "erase" and "Autostart" and connect my BlackBerry 8700G, but it failed.it shows :can not creat CFP instance,please ensure the BBCFPCOM driver is registered.
I have installed the Desktop Manager4.6 and 8700 4.5 rom. and net framework2.0.
can anyone tell me how to figure out it ?
u need to download and install the installer program found in support this will create the c:\mml folder
[deleted] wrote:
Hello,
When connect my blackberry to MFI loader it is asking for Oracle client software v.8.1.7 or greater.Please help me to solve this particular problem.
speen
i had this same problem initially.. to correct this download the configuration files from support and replace the configuration files i think its in c:\mml\bin
that should solve ur problem
[deleted] wrote:
I would like to finish getting this solution...i got most from the past but need the last few for MFI
Can someone tell me where to get it. and how?
once u have rocker dongle go to the support section and you can download it there
[deleted] wrote:
Friend! Try this:
If you got error during flash your blackberry Unable to reconnect to the device during a multi-stage load operation you should be type START to out cal mode then you will see error 507 , after you need to update os again the blackberry to done your job.
BR
Hassan
hi i don't understand this explanation.. can u provide me with a screenshot or step by step detailed instructions on how to do this ?
thanks
so stuck & frustrated right now ...ok i have all 8 but on connect i get err msg please help also not a boob to gsm unlocking so be nice
BB
ajubaba wrote:
Is necessary to flash with same firmware?Vodafone for Vodafone or work
any firmware?
thanks
br
Friend! Put same boot.
BR
Hassan
Hello
[deleted] wrote:
Sorry. I haven't got Rocker Dongle.....T_T..... Can you send it to me? Only bootsoftware and instructions. Thanks alot.
This is my email : p.nhatthanh87@gmail.com
Friend! That no is possible.
If you have Rocker you have free access to this
Software.If you don't have Rocker,Buy one and
after you unlock 10 Phones you have money for
pay Box.All of the unlocks that knives only come
out profit. Do you want better?
BR
Hassan
Hello
[deleted] wrote:
I would like to finish getting this solution...i got most from the past but need the last few for MFI
Can someone tell me where to get it. and how?
Friend! all software is in Rocker Support.
Connect your Rocker and Enjoy.
BR
Hassan
where can I get the all8files?
thaks
Hi
onlinecode wrote:
hi i don't understand this explanation.. can u provide me with a screenshot or step by step detailed instructions on how to do this ?
thanks
Friend!Black Berry is not a Nokia DCT4.
Is necessary Some knowledge to do an
unlock without destroying Phone.
Legija left in the post a good explanation with all
the steps to do the unlock without problems.
Read all
BR
Hassan
Hello
g4n wrote:
where can I get the all8files?
thaks
All Software is in Rocker Support For all
Rocker Users.
BR
Hassan
vdeo how to conect
open mml and then unselect the auto start and the full erase
connect the phone and unselect the auto select and the nuke and the press start when ready it will display ( waiting for diconnect 00 seconds) ur good to go u will have a one display on ur phone
enjoy
