25.11.2008 MotoRocker v2.24 released
Whats new:
This is bug fix release:
There are some language localisations added too :
Thanks goes to contributors, gsmprounlock, tostefo, veliki, macu .
Please download "MotoRocker_v2.24.exe" from support area.
Enjoy Using Rocker Dongle !
Great job Mr. Legija, this fix is the same problem that I posted in video file in this Forum, great job, really ROM4 using ExTP giving me some errors as you said above. I used Motorocker v2.22 in order to unlock this ROM4 models.
bug for write fullflash in motorola w510, error adress.......... please solved this
Post log please.
Welcome dear user.
Motorocker version used: 2.24 (Motorola V980 Micron, R24)
Package file: D:\CELULARES\boxes originales\rocker box\flashes\w510\Retail_R452G_G_08.11.05R_PDS009_LP0039_DRM0101_JPJAVA_G_08_W510ME_06_00_07R_GSTPEMBARTDE076_1FF\Retail_R452G_G_08.11.05R_PDS009_LP0039_DRM0101_JPJAVA_G_08_W510ME_06_00_07R_GSTPEMBARTDE076_1FF.rnsf
Language file: NOT SELECTED
Selected: Motorola W510, firmware: R452G
Clicked button: WRITE PACKAGE (&Escribir paquete)
Detected motorola interface: Motorola Flash
Full bootcore version: 011302FF00000C50
Full firmware version: R452G_G_08.11.05R:GSTPEMBARTDE076
NEED Motorola TP manual !!! and foto :yikes:
Testpoint can be found in rocker download site.
For manual.... just open software and follow step by step what software say.
It's very easy.
Ok, just uploaded MotoRocker_v2.25 to support area.
- Fixed bugs with bootcore 09.02
- Fixed "Access Violation"
- Some other small fixes too
You can download it and install, please report any new discovered problems here.
Enjoy Using Rocker Dongle !
Just a detail, after doing a successfully unlock with P2k phones, when ask for phone info still shows "SIM Lock Present" and there's no SIM Lock :lol:
BR.-
Hi, Motorola W5 bootloader 0C.A1 working 1000% with latest Moto Rocker v2.25
here is my log.
Advice: the TP con exTP is very dificult only working with alternative TP, and finaly boot downloaded from 0C.A1 to 0C.50
thx Mr. Legija!
Welcome dear user.
Motorocker version used: 2.25
Selected: Motorola W5, firmware: R452GL8
Current language: Rocker
Clicked button: UNLOCK (&Unlock)
On WIZARD selected: &This is a new phone. Need to do default prepare stage
On WIZARD selected: &No luck with default prepare stage. Need to try an alternative prepare.
On WIZARD clicked: CONTINUE button
On WIZARD accepted port: COM80
Wait for TCI started.
Switching to TCI mode...
Clicked button: UNLOCK (&Stop)
Waiting for flash interface init...
Clicked button: UNLOCK (&Unlock)
On WIZARD selected: &This is a new phone. Need to do default prepare stage
On WIZARD clicked: CANCEL button
Clicked button: UNLOCK (&Unlock)
On WIZARD selected: &No luck with default prepare stage. Need to try an alternative prepare.
On WIZARD clicked: CONTINUE button
On WIZARD accepted port: COM80
Detected motorola interface: Motorola Flash
Full bootcore version: 011302FF01000CA1
Full firmware version: R452GL8_G_08.00.05R:GSTPEMBAMDGTVZLA045
Decision: bootcore flashing needed.
The ExTespoint's COM port is connected.
Full bootcore version: 011302FF01000CA1
Full firmware version: R452GL8_G_08.00.05R:GSTPEMBAMDGTVZLA045
Uploading ramloader of version: 0C.50
Reading 131072 bytes...
Reading 65536 bytes...
Reading 131072 bytes...
Show WINDOW: Head = "Stage complete.", line1 = "Please wait till phone is powered on or put it to flash mode manually.", line2 = "Wait for phone to be detected (see below). Then Click Continue...", line3 = "", button1 = "", button2 = "&Continue"
Showed WINDOW modal result: 2
Full bootcore version: 011302FF01000CA1
Full firmware version: R452GL8_G_08.00.05R:GSTPEMBAMDGTVZLA045
Uploading ramloader of version: 0C.50
Show WINDOW: Head = "Stage complete.", line1 = "Please wait till phone is powered on or put it to flash mode manually.", line2 = "Wait for phone to be detected (see below). Then Click Continue...", line3 = "", button1 = "", button2 = "&Continue"
Showed WINDOW modal result: 2
Show WINDOW: Head = "Stage complete.", line1 = "Your phone now is ready for the ExTestpoint stage.", line2 = "1. Make sure the USB (EMU) cable is plugged into phone and connected to the PC.", line3 = "2. Make sure the LCD is disconnected from the board.", button1 = "", button2 = "&OK"
Showed WINDOW modal result: 2
The ExTespoint's COM port is connected.
ExTP window: clicked the START (&Start) button.
ExTP window: Started enumeration sequence.
ExTP window: Power switched ON. Wait for device to enumerate...
ExTP window: Sorry, no success. Not expected bootcore version: 0CA1
Clicked button: UNLOCK (&Unlock)
On WIZARD selected: &This is a new phone. Need to do default prepare stage
On WIZARD selected: &Already passed Prepare stage. Need to go to ExTP stage directly.
On WIZARD clicked: CONTINUE button
On WIZARD accepted port: COM80
The ExTespoint's COM port is connected.
ExTP window: selected prepare method is "Alternative"
ExTP window: clicked the START (&Start) button.
ExTP window: Started enumeration sequence.
ExTP window: Power switched ON. Wait for device to enumerate...
ExTP window: Sorry, no success. Not expected bootcore version: 0CA1
ExTP window: clicked the START (&Start) button.
ExTP window: Started enumeration sequence.
ExTP window: Power switched ON. Wait for device to enumerate...
ExTP window: Sorry, no success. Not expected bootcore version: 0CA1
Clicked button: UNLOCK (&Unlock)
On WIZARD selected: &This is a new phone. Need to do default prepare stage
On WIZARD selected: &Already passed Prepare stage. Need to go to ExTP stage directly.
On WIZARD clicked: CONTINUE button
On WIZARD accepted port: COM80
The ExTespoint's COM port is connected.
ExTP window: selected prepare method is "Alternative"
ExTP window: clicked the START (&Start) button.
ExTP window: Started enumeration sequence.
ExTP window: Power switched ON. Wait for device to enumerate...
ExTP window: ExTP worked, starting booting...
Full bootcore version: 011302FF01000000
Phone serial number: 681011C0091C092B5FCFD861BA64F002
Uploading ramloader of version: custom ramloader used.
Phone is booted with ExTestpoint. Flash ID: 80898810
Flash ID: 0089 8810, SCC status: 80
Show WINDOW: Head = "Unlock complete.", line1 = "Reconnect your phone for software to make final step.", line2 = "Wait for phone to be detected (see below). Then Click Continue...", line3 = "", button1 = "", button2 = "&Continue"
Showed WINDOW modal result: 2
Detected motorola interface: Motorola Flash
Attempt to restore: Found restore point ok.
Full bootcore version: 011302FF01000CA1
Full firmware version: R452GL8_G_08.00.05R:GSTPEMBAMDGTVZLA045
Uploading ramloader of version: 0C.50
Done.
Unlocked OK
oh sorry! bootloader is finaly de same 0C.A1 just use 0C.50 in the process..
Working in perfect condition this last update MotoRocker 2.25 with ARGON and ROM4 models, today I unlocked five v3rEDGE (boot 0C.C1 & 0C.F4 both tested)...all OK!!...Fixed issue with this platform in previous version of MR
...Nice job....
Just letting know.
BR.
chatfan
[deleted] wrote:
oh sorry! bootloader is finaly de same 0C.A1 just use 0C.50 in the process..
I would like to know wich method (not procedure) do you use to make alternative tp, since I look the pcb under a 20x magnifier and I saw that it's too dificult to connect the needle in the tp, because you have some components that won't let you a "clear way" to connect the needle.
Thx in adv.
BR.-
It is exactly same as for U3. It is not so complicated, but yes, need some sort of magnifier.
Yesterday i was trying to read CG4 from a working V3, but software is missing something as i could'nt select what CG to read, had to use prior version, here is screenshot of window i got without choices, luck