C139 Tracfone unlock 100%.

Not using box

I am using only computer and T191 cable.

Ken

moonmoon8 wrote:

Which box are you using for interface?

probirgsm wrote:

I am using only computer and T191 cable.

Ken

Can you test with other phone.?

not sure what you mean "test with other phone"

The T191 cable and computer worked perfectly with DMTOOLS
on my "Cingular C139" No luck on my Tracphone C139

Please state again what you are asking.

Thank you,
Ken

lasfar wrote:

Can you test with other phone.?

AKS_KADHAR wrote:

The T191 cable and computer worked perfectly with DMTOOLS
on my "Cingular C139" No luck on my Tracphone C139

Please state again what you are asking.

Thank you,
Ken

Check this video, is in 3gp format, use quicktime player to see it. And i mean with other tracfone phone.
http://rapidshare.com/files/106621159/MOV01100.rar.html

Could not see video clearly

Could not make out any of the writing on the screen
of you tracphone.
What was the first sequence of buttons you pressed?
It look like you where getting a lot of data on the cell
phone screen.

Could you please compare the phone that you demostrated
to mine. There must be a difference explaining why I can not
communicate.

With MSTOOLS 8r I can only do a READ. Here is what I get

Open serial port...ok
Connecting to handset...
Phone IMEI: 359xxxxxxxxxxx
Setting factory test mode...ok
Software version: 8817
Hardware version: 001U1006
Flex version: FFN_C139_TP_TOH
Language pack version: LPN_C139_NA_TOH
Transiver kit number: SJUG3757CA
Simlock state: UNLOCK
Bar code: P324955475
Battery voltage: 4.1084
Handset info read ok

AKS_KADHAR wrote:

Check this video, is in 3gp format, use quicktime player to see it. And i mean with other tracfone phone.
http://rapidshare.com/files/106621159/MOV01100.rar.html

First was #02# to view phone ver. and see uart flag, because someone said when flag is =1 don't connect to pc but my phone was =1 and work perfect.
Second **16379# trace on (or modem on).
3- Connect phone to pc with t191 rj45 universal cable.
4- Select c139 model in mot931 and press unlock.
5- Do the rest with rocker or dmtool.

Do you use a box?

Other than you using a T191 r45 universal cable and possible
different firmware in the units, I can't figure out why I can get it
to work. I know the cable has to be good since I just unlocked
my Cingular version of the C139.

thank you,
Ken

AKS_KADHAR wrote:

First was #02# to view phone ver. and see uart flag, because someone said when flag is =1 don't connect to pc but my phone was =1 and work perfect.
Second **16379# trace on (or modem on).
3- Connect phone to pc with t191 rj45 universal cable.
4- Select c139 model in mot931 and press unlock.
5- Do the rest with rocker or dmtool.

i READ UNLOCK CODE FOR C139 HOW CAN I ENTER IT?

I'VE READ UNLOCK CODE WITH COMPAL SOFT BY RS232 CABLE. pHONE WRITES SIM NOT VALID. hOW CAN i ENTER TIS CODE?

moonmoon8 wrote:

I'VE READ UNLOCK CODE WITH COMPAL SOFT BY RS232 CABLE. pHONE WRITES SIM NOT VALID. hOW CAN i ENTER TIS CODE?

This coz you need flash the phone to get it work.

That is no false tranfone works --- I have three 8.8.17 and does not work

Work very well.
1 - Use prolific 2303 cable.
2 - After write the boot to phone (phone frezze) you must to flash.
3 - Conect with rocker using Prolific 2303 cable and without battery.
4 - Select C139 and push conect, now insert battery.
5 - You can flash now and then unlock.
Tested.....
Remember (Prolific 2303 cable)
Tested with ODM Rocker 1.18 and flashed with firmware 1.0.0.6 from Movistar.
Escuse my English.

tested and worked.! excellent contribution ..

the process is correct:

[deleted] wrote:

Work very well.
1 - Use prolific 2303 cable.
2 - After write the boot to phone (phone frezze) you must to flash.
3 - Conect with rocker using Prolific 2303 cable and without battery.
4 - Select C139 and push conect, now insert battery.
5 - You can flash now and then unlock.
Tested.....
Remember (Prolific 2303 cable)
Tested with ODM Rocker 1.18 and flashed with firmware 1.0.0.6 from Movistar.
Escuse my English.

thank you, thank you,thank you,

good

goooooooooooood

Celhack, 10X U

Hello, is necessary to flash c139 before unlock? and what ODM versions doesn`t works with this model?

it workk tnx

Didn't work for me. I use regular T191 COM cable and I selected trace on but the phone won't connect.

[deleted] wrote:

Work very well.
1 - Use prolific 2303 cable.
2 - After write the boot to phone (phone frezze) you must to flash.
3 - Conect with rocker using Prolific 2303 cable and without battery.
4 - Select C139 and push conect, now insert battery.
5 - You can flash now and then unlock.
Tested.....
Remember (Prolific 2303 cable)
Tested with ODM Rocker 1.18 and flashed with firmware 1.0.0.6 from Movistar.
Escuse my English.

just want to confirm that this procedure worked very well on ODM Rocker 1.23b however i used full flash "retail"

C139_MOTOROLA_E88_1.0.01.E.__Full_lp_T12.ubf

best regards

goooooodddd