What is the solution for S-BLANK mode phones

I got v3 i tried with tp and without Tp but my phone detect as S-blank mode always...The phone came with light only on keyboard...

Any solution for this,..............

not only software can be.
hardware also.
also can be other platform flashed in your phone.
usualy help also first write monster and after make repair.

when i try to write monster file

its stops at writing data (10080000-100800C7) screen getting faded white color..wht could be the hw fault

had same problems..in my case was hardware damage....

Legija_2 wrote:

when i try to write monster file

its stops at writing data (10080000-100800C7) screen getting faded white color..wht could be the hw fault

first try connect phone with TP and write flash
if not help try reball or rehot cpu and flash ic.
and use some lower rocker version,not 2.15.

blondie226791 wrote:

first try connect phone with TP and write flash
if not help try reball or rehot cpu and flash ic.
and use some lower rocker version,not 2.15.

what wrong with 2.15 version? is there a bug ?

Legija_2 wrote:

not only software can be.
hardware also.
also can be other platform flashed in your phone.
usualy help also first write monster and after make repair.

This is impossible for him. His phone is in permanent blank mode. That means he cannot flash a monsterpack or any other regular flashfile. Only with an Image/bootloader flash, because bootloader is stored inside the flash. Or bootloader restore.

I have the same problem with rockerbox, for V191 and V3 (R347)...I use version 2.14 and 2.15 of motorocker:

My proccedure was:
1-
-Repair pds with TP and without TP
-Full Flash
-Repair

Nothing...cells in blank mode :nonod:

2
- Load bootloader and PDS images
- FullFlash
-Repair

Nothing...cells in blank mode :nonod:

Definitely I need smart-clip...rocker is not good for repair PDS :mad:

manstein wrote:

I have the same problem with rockerbox, for V191 and V3 (R347)...I use version 2.14 and 2.15 of motorocker:

My proccedure was:
1-
-Repair pds with TP and without TP
-Full Flash
-Repair

Nothing...cells in blank mode :nonod:

2
- Load bootloader and PDS images
- FullFlash
-Repair

Nothing...cells in blank mode :nonod:

Definitely I need smart-clip...rocker is not good for repair PDS :mad:

Look like i'm agree with this opinion.

@ legija,
Please add pds repair features to our lovely box.
So i dont have to go to my friend to borrow his Smart-clip, only to repair my phone PDS.

Thanks b4
br

Guys, I think the problem isn't the PDS repair. What I said is correct, install new bootloader to put a new bootloader to the phone. Or Image flash works also. If it doesn't work (phone in blank state) and you used a valid bootloader, it can be a hardware problem, sure. Look around the testpoint for damage.

nogoi wrote:

This is impossible for him. His phone is in permanent blank mode. That means he cannot flash a monsterpack or any other regular flashfile. Only with an Image/bootloader flash, because bootloader is stored inside the flash. Or bootloader restore.

exist many reason for blank mode.
in some cases phone refuse write flash(give write error in some addres)or some like this.
this can be hardware or software problem.
if you connect phone with TP and write full backup(include also bootcore) in some cases you can write this one(without write error).
in some cases help only monster pack.
just try and see.
for example try get one phone and make prepare cicle with other tool or write some files in this phone(search in this forum and you will find).
phone become blank.
OK,from this step try and see.
and after post here please how it's work for you.
Now other thing,v3i have some diferent platforms.
user can try write other not compatible platform in phone(in v3i).
result is?
repair for example write in phone also bootcore.
if you make TP and make repair,software write bootcore also in phone.
try and see,you will have surprises.
in some cases repair not help.
need write first full or monster if phone accept and after make repair.

huelva wrote:

Guys, I think the problem isn't the PDS repair. What I said is correct, install new bootloader to put a new bootloader to the phone. Or Image flash works also. If it doesn't work (phone in blank state) and you used a valid bootloader, it can be a hardware problem, sure. Look around the testpoint for damage.

if TP is shorted to gnd software give unknow flash id.
if you have TP damaged you can read/write without problem.
but phone always stay in blank mode.
sharaz191 have write problem.
here can be other hardware or software problem,not TP problem.

Mally wrote:

exist many reason for blank mode.

I told no reason. We write here about the solution.

Mally wrote:

this can be hardware or software problem.

That can always be a hardware problem, nothing new.

Mally wrote:

if you connect phone with TP and write full backup(include also bootcore) in some cases you can write this one(without write error).
in some cases help only monster pack.
just try and see.

Not try and see. I write again, it is not possible to flash a Monsterpack or any regular flashfile into a phone in blank state, because there is no bootloader in regular flashfile and you need one. That is a fact. And a backup is what I said with install a new bootloader.

Mally wrote:

repair for example write in phone also bootcore.

PDS repair or which repair exactly?

Mally wrote:

if you make TP and make repair,software write bootcore also in phone.
try and see,you will have surprises.

Which repair? PDS repair doesn't write a new bootloader to bootloader zone.

Mally wrote:

in some cases repair not help.
need write first full or monster if phone accept and after make repair.

Yes, and you can only flash from flashmode (or normal) but not from blank mode, except bootloader flash.

Pilot18 wrote:

if TP is shorted to gnd software give unknow flash id.
if you have TP damaged you can read/write without problem.
but phone always stay in blank mode.
sharaz191 have write problem.
here can be other hardware or software problem,not TP problem.

I never said the TP is broken, I wrote around the TP. I hope this is clear. At least, I didn't have you with write problem and stay in blank mode. If the phone stays in blank mode, it is also a write problem (cannot written)
Also he had a write problem with flashing on a blank phone, no wonder, this is impossible. I explained why.

samgsm2 wrote:

Which repair? PDS repair doesn't write a new bootloader to bootloader zone.

you sure?

samgsm2 wrote:

Yes, and you can only flash from flashmode (or normal) but not from blank mode, except bootloader flash.

try connect phone with TP,press connect in rocker.

samgsm2 wrote:

PDS repair or which repair exactly?

some new here
exist this 2 function in rocker?
i know only one and it's called repair.
this function make pds repair and rewrite bootcore also.

samgsm2 wrote:

I never said the TP is broken, I wrote around the TP. I hope this is clear. At least, I didn't have you with write problem and stay in blank mode. If the phone stays in blank mode, it is also a write problem (cannot written)
Also he had a write problem with flashing on a blank phone, no wonder, this is impossible. I explained why.

you sure?
and some more,phone write,but not write in specific flash zone.
if it's hardware can be problem with flash chip or trace between flash and cpu,not with damaged TP.

jakewoolley wrote:

you sure?

Yes, but I'm little bit surprised that you ask me, because this is nothing new for Motorola.

jakewoolley wrote:

try connect phone with TP,press connect in rocker.

And then? I see no sense for flashing and your advice here.

jakewoolley wrote:

some new here
exist this 2 function in rocker?
i know only one and it's called repair.
this function make pds repair and rewrite bootcore also.

I guess "repair" in Rockerdongle is just PDS repair. You say repair in rockerdongle rewrites the bootloader. Can you prove? Is there a bootloader backup/restore function? Yes it has. edit: After I searched, it seems, yes "Repair" rewrites the bootloader too. It repairs both. Nevertheless, he could try to restore bootcore zone only with valid bootloader and see what happens. Otherwise, it might be a hardware problem.

jakewoolley wrote:

you sure?
and some more,phone write,but not write in specific flash zone.
if it's hardware can be problem with flash chip or trace between flash and cpu,not with damaged TP.

Sure in what?

r600 you have PM.
about bootloader write,i'am don't want prove anithing.
just press repair and read carefull what software write down when make repair.
for other.
sorry i'am close this offtopic thread.