RobinvD wrote:
i dowmload this file R26_U_83.38.38.04.01P_LP0039_DRM0103_JPNL_R26VFV980_04_SE6031BXXD8023_1FF
With tp its connect.Without TP it wont connect
but ADDR failed when i click flash
Nobody see this? His phone is in blank mode and you cannot flash. Only Images with bootloader or bootloader only. If your phone has a bootloader and is connected in Flash mode, you can flash this file.
Can somebody tell me whats different between monster file and normal file?
What is a normal file? Normal file is a Monsterflash or Reflash.
@sharaz 191!!
Download the v2.11 of support site.
It is the same like the 2.10.
I have tetsetd both.
-I have my phone in blank mode and i suxxfully flash it with both the 2.10 and 2.11.
-i also have the phone in flash mode and i flash it with both.
The problem with me is i do not really know which flash is now passing to my phone.
I put r26.83.38.38 and it passes(software upgrade on display,dispaly lights grey ,but when i on the phone at the end it doesnt get on)
I put r26.83.28.38 it passes also,phone starts but freeze and displaylight went off after Vodafone welcome logo.
To know abt the difference(and many more) abt the files,here a link:
http://forum.gsmhosting.com/vbb/showthread.php?t=443581
Briefly said and senior members may rectify me if i am wrong
What Is Monster Flash And Reflash?
A. Reflash Come With Only Firmware And Drm Area.
B. Monster Flash Come With Firmware, Flex, Pds Info, Drm, Lang, Mostly Everything.
monster don't contains pds.
image file contains all.
monster contains reflash+flex.
monster file also called full.
it's normal if you can't write normal file with damaged boot or pds.
all motorola files contains bootloader.
if this one can't find specific info in phone get addr failed.
most problem come from bootcore,some from damaged PDS zone.
@sharaz191
some info about monster,reflash e.t.c. you can find in my user manual posted here in forum
renato_gallo wrote:
monster don't contains pds.
Every 1FF contains a PDS version, but this is not important here. It doesn't repair a damaged PDS zone.
renato_gallo wrote:
image file contains all.
Not always. Usually a Firmware and Boot. And after an Image Flash, you need PDS repair.
renato_gallo wrote:
it's normal if you can't write normal file with damaged boot or pds.
With damaged PDS, flashing should be possible. After flashing with valid Firmware, do PDS repair and phone should be alive.
renato_gallo wrote:
all motorola files contains bootloader.
No, all original Motorola Fullflashs or reflashs have no bootloader inside. It means, no success with flashing a Blank phone with these files. Only bootloader or Images with bootloader helps.
renato_gallo wrote:
if this one can't find specific info in phone get addr failed.
most problem come from bootcore,some from damaged PDS zone.
His phone is in Blank mode, that's the main reason.
tolber wrote:
Every 1FF contains a PDS version, but this is not important here. It doesn't repair a damaged PDS zone.
sure.
can you decode normal shx fullflash(or monsterpack)and tell exactly where
is pds zone in this file.
i'am not tell here about smartclip full or other tools full readed from phone.
normal shx full,exactly where is pds zone?
tolber wrote:
Not always. Usually a Firmware and Boot. And after an Image Flash, you need PDS repair.
image file is used for fill empty flash chip.
empty meen empty.
some seem in this one can be filled with radiocom for example.
not need repair PDS for this.
for used flash chip yes,pds repair can help.
but usualy image files is used for fill empty flash chip.
tolber wrote:
With damaged PDS, flashing should be possible. After flashing with valid Firmware, do PDS repair and phone should be alive.
here you right,corectly repaired PDS zone usualy solve many problem.
you can't flash phone if in pds zone wrong info about phone version and bootloader cant call bootcore for write in specific zones.
rsd usualy get security error.
this is one example,exist also other.
tolber wrote:
No, all original Motorola Fullflashs or reflashs have no bootloader inside. It means, no success with flashing a Blank phone with these files. Only bootloader or Images with bootloader helps.
bootloader have all flashes,image,full,reflash e.t.c.
bootcore,yes,not all packages have it.
bootcore and bootloader is diferent,try see.
use any flash,decode it and see.
exist many free resurses for this.
one example is faimos criticall error in v360 phones for example,bootloadre have diferent version for diferent firmware version
tolber wrote:
His phone is in Blank mode, that's the main reason.
here i'am answered for hans salim QW🙂
so,my QW remain.
try decompile normal shx full(monster file) and show where is exactly pds in this file.
diamante978 wrote:
sure.
can you decode normal shx fullflash(or monsterpack)and tell exactly where
is pds zone in this file.
i'am not tell here about smartclip full or other tools full readed from phone.
normal shx full,exactly where is pds zone?
Here a original Fullflash with original name:
R479_G_08.B5.10R_PDS005_LP0039_DRM0101_VSTGERMAN20 6_JPJAVA_G_08_V3i_06_00_04R_SE7779AXXU10A6_1FF
What is PDS005? I know some files has a changed (newer) PDS called sticky Firmware. It means downgrade to older Firmware not possible because PDS is upgraded.
diamante978 wrote:
image file is used for fill empty flash chip.
empty meen empty.
some seem in this one can be filled with radiocom for example.
not need repair PDS for this.
for used flash chip yes,pds repair can help.
but usualy image files is used for fill empty flash chip.
I worked with Image files. The phone flash ship was not empty, only bootloader was damaged. Used the Image, phone was in Flash mode. Repaired PDS and flashed a Fullflash. No success without PDS repair.
diamante978 wrote:
here you right,corectly repaired PDS zone usualy solve many problem.
you can't flash phone if in pds zone wrong info about phone version and bootloader cant call bootcore for write in specific zones.
rsd usualy get security error.
this is one example,exist also other.bootloader have all flashes,image,full,reflash e.t.c.
bootcore,yes,not all packages have it.
bootcore and bootloader is diferent,try see.
use any flash,decode it and see.
exist many free resurses for this.
What is the difference between bootcore and bootloader. This is the same for me. Or you mean the ram downloader?
Iosif1995 wrote:
Here a original Fullflash with original name:
R479_G_08.B5.10R_PDS005_LP0039_DRM0101_VSTGERMAN20 6_JPJAVA_G_08_V3i_06_00_04R_SE7779AXXU10A6_1FF
What is PDS005? I know some files has a changed (newer) PDS called sticky Firmware. It means downgrade to older Firmware not possible because PDS is upgraded.
yes,write in some pds seem some specific info.
try use flashbackup for example and try extract pds from this file.
flashbackup get mesage"pds zone not found"
you only upgrade some specific seem's in pds with this file,not replase it.
Iosif1995 wrote:
I worked with Image files. The phone flash ship was not empty, only bootloader was damaged. Used the Image, phone was in Flash mode. Repaired PDS and flashed a Fullflash. No success without PDS repair.
yes,in some cases,image help you.
in normal flashing pds zone is protected.
if you write in used flash chip,this zone is protected,and you can't write in this zone.
bootcore,yes.
just try and see with new flash IC.
you will see.
Iosif1995 wrote:
What is the difference between bootcore and bootloader. This is the same for me. Or you mean the ram downloader?
yes,ram downloader.🙂
here is my mistake,sorry.
in this way software write in phone(rocker for example)when you make connect.
i don't know exactly,software is protected,and some info is not accesible,but i think,developer use own loader for this.
eliest wrote:
yes,write in some pds seem some specific info.
try use flashbackup for example and try extract pds from this file.
flashbackup get mesage"pds zone not found"
you only upgrade some specific seem's in pds with this file,not replase it.
A small upgrade then. Where is the small upgrade stored in the flash? Maybe Firmware?
eliest wrote:
yes,ram downloader.🙂
here is my mistake,sorry.
in this way software write in phone(rocker for example)when you make connect.
i don't know exactly,software is protected,and some info is not accesible,but i think,developer use own loader for this.
I call this bootloader, but I know that you mean the bootloader if you say bootcore. Anyway, what I already said, he cannot flash regular files in Blank mode, he need a new bootloader (or for you bootcore) to bring the phone into flash mode.
ODMSupport wrote:
A small upgrade then. Where is the small upgrade stored in the flash? Maybe Firmware?
here i'am write about full pds file.
full don't contains full pds file.
with image you can fill in empty flash chip ,with full not.
ODMSupport wrote:
I call this bootloader, but I know that you mean the bootloader if you say bootcore. Anyway, what I already said, he cannot flash regular files in Blank mode, he need a new bootloader (or for you bootcore) to bring the phone into flash mode.
see below.
i'am write bootloader(or ram downloader) contains all files(reflash,full,image e.t.c.)
bootcore contains only specific files.
exist also bootcore replase files,not need write big file for this.
phone enter in blank mode with TP also.
you can use also "without TP" for this,same result.
or try search here,i'am post one file for make unlock in v360 phones with 09.02 bootcore version.
if you write this one,phone become blank.
you can make unlock without fisical TP(as blank mode),and after rewrite full,or reflash back and phone come to life.
work,belive me.
in this way i'am unlock many v360 phones.
ODMSupport wrote:
see below.
i'am write bootloader(or ram downloader) contains all files(reflash,full,image e.t.c.)
bootcore contains only specific files.
phone enter in blank mode with TP also.
you can use also "without TP" for this,same result.
or try search here,i'am post one file for make unlock in v360 phones with 09.02 bootcore version.
if you write this one,phone become blank.
you can make unlock without fisical TP(as blank mode),and after rewrite full,or reflash back and phone come to life.
work,belive me.
in this way i'am unlock many v360 phones.
rocker have problem with this boot,and can't unlock corectly.
Bootloader is no ram downloader, you confuse me. When I say bootloader, it is the bootloader. You call it Bootcore I know. Both is the same. And I know, problem is when the phone is in permanent Blank mode, new bootloader is needed. I say this again and again.
Thank you all for great information.
Finally its connected to the s-flash mode but its stops at 62% is that flash chip problem?
not sure.
try flash this phone with force flash mode.
13+14 shorted.
and check your battery,need be fully charged.
ren777 wrote:
not sure.
try flash this phone with force flash mode.
13+14 shorted.
and check your battery,need be fully charged.
battery is fully charged.Untill 62% its going well after 62% its says waiting for flash interface and stop.Even i cant erase flash chip after 62% its says erasing error
flashed 3 times with 2 different files, still same
phone can hawe hardware error too.
what rocker you use?
not so important this,but try with old version and see.
try also connect phone with TP and see if you can flash it.
rsd alow flash in this phone?
same problem with rsd also?
if problem persist try remove metalic shield and reball flash ic and cpu.
ren777 wrote:
phone can hawe hardware error too.
what rocker you use?
not so important this,but try with old version and see.
try also connect phone with TP and see if you can flash it.
rsd alow flash in this phone?
same problem with rsd also?
if problem persist try remove metalic shield and reball flash ic and cpu.
used 2.11 n 2.15.
RSD lite giving error when its flashing.
Ill try HW post result