ishanunlockserver wrote:
I think we have some bugs on this motorocker 2.17a.. I tried unlock V3 Rzr 8.26 unknown flash id error occur, I tried to unlock with old version MR 2.15a unlocked perfectly, same error with V551 unknown flash id error ...
Can you fix it please?
Hi, this is fixed with new version 2.18
Regards.-
hello mr legjija, the module odm 1.23 not work fine, i discovery two bugs, not direct unlock motorola c115 and sonyericson j100,only read codes, i working with cable prolific
Need Help !
centrohifi wrote:
Imam problem !
ODM software rade sve verzije a ne radi mi MotoRocker ( ni 2.14 ni 2.15),
soft se pokrene i digne ali samo okvir, unutra sve prazno !
Probao deinstalirati pa ponovo instal ali opet isto !
Molim pomoč !
Have problem only on one mashine ! ODM work good but, any Motorocker softw. work only like picture frame ???
Any idea ?
B.R.
luckysta ... :leaving:
Error module 2.18
error ; i try flash but error in all models
hello , other bug in odm rocker, version 1.22 1.23 not work fuction formatfss , in the log see complete fuction ok, in the phone not work,i tested this fuction with c261, work fine with 1.18
:mad: ODM 1.22 - 1.23 bug
:mad: Moto W375 (and many other model of phone) very hard to boot phone. Cable Prolific. Only 115200 baudrate was used and connection to phone very hard, other speed always error:
v1.23 Prolific baud 115200:
[I]Check if phone already booted
Power ON phone shortly
Phone found
Sending signature
Sending boot
No answer from boot1
Boot Loading Error[/I]Cable FTDI boot on high speeds, but don't read full flash or lang, also always error.
v1.23 FTDI baud 460800:
[I]Check if phone already booted
Power ON phone shortly
Phone found
Sending signature
Sending boot
Boot sent
Boot Succesfully Loaded
Calypso+ HS
Flash: ID:002088C4
Flash size : 16777216
Model type : MOTOROLA_H80S
FW version : 0.0.79
CODE version : CODE.90.01
Flex version : FLEX_D6_003
LP version : 0079_014
Start reading ...
Phone not answer ...
Reading aborted.
Start reading ...
CRC err : 0B vs 29
Reading aborted.[/I]ODM Rocker v1.18 very stable conection on 115200, but only 115200!!! all next (high) version of ODM Rocker have bug "Boot Loading Error" or "Baud rate not supported 01"
v1.18 Prolific baud 115200, read Full, eprom, LP:
[I]Check if phone already booted
Power ON phone shortly
Phone found
Sending signature
Sending boot
Boot sent
Boot Succesfully Loaded
Calypso+ secured
Model type : MOTOROLA_H80S
FW version : 0.0.79
CODE version : CODE.90.01
Flex version : FLEX_D6_003
LP version : 0079_014
Provider : 26201
Lock status : Locked
Wrong enter : 5
Start reading ...
Reading done in 24:30 min.
Start reading ...
Reading done in 00:11 min.
Start reading ...
Reading done in 02:06 min.[/I]Reading 4Mb more then 30 min - very SLOW.
Time is money!!!
Version 1.18 - 1.23 Prolific baudrate more then 115200:
[I]Check if phone already booted
Power ON phone shortly
Phone found
Sending signature
Sending boot
Boot sent
Boot Succesfully Loaded
Baud rate not supported 01[/I]Sure (as for format) in lastest versions this feature temporary removed, we forget inform about this.
@ ODMSupport
ODMSupport has chosen not to receive private messages or may not be allowed to receive private messages. Therefore you may not send your message to him/her
ODMSupport wrote:
can you give little more info about your PC?
this is need for catch bug with connection
ICQ ? mail ? :confused5:
How can I write to you? :confused5:
Notebook Asus Z99H (Asus A8000H Series Notebook)
Chipset - Mobile Intel Calistoga-GML i940GML
CPU - Mobile Intel Celeron M 440, 1866 MHz (14 x 133)
RAM - 1Gb
HDD - 100Gb
USB - 5
Problem with connection only in ODM Rocker, other soft for diff phone work OK (joker for Siemens, DM tool for Moto, MultiGSM for LG... etc)
ODM v1.18 and older - connect stable, but only 115200.
show me picture of advanced settings of your FTDI port.
See picture in attach.
Value marked red changed from 1 to 16, result - "0"
i just want see timeouts params - zero is good.
try to contact me via pm (now turn on recieve the pm)
bugs in odm_rocker 1.24b
w375 unlock imei = phone is hacked:81
repair whith odm rocker 1.22
New version of ODM Rocker (v1.23 - 1.24) have bug:
Don't right read IMEI from SE K200, v1.18 - 1.19 - all OK.
See attach picture.
odm rocker v 1.24 unlock w375 = phone is hacked 81
RM880 wrote:
bugs in odm_rocker 1.24b
w375 unlock imei = phone is hacked:81repair whith odm rocker 1.22
That same problem I've got .. and to see the IMEI *#06# appears a sign "?"
odm rocker v 1.24 unlock w375 = phone is hacked 81
that mistake is solved giving Unlock after flash ..
check lastest ODMRocker.exe
problems must be solved.
ODM 1.25 problem with w375 not solved.
W375 Pannon Hungary ver 072. After UNLOCKNET phone hangs after Pannon logo. After fullflash same situation.
As we all know in ODM Rocker fullflashing for W220 or W375 is realy FULLFLASHING without EEPROM, so I flashed phone using working EEPROM, as result: "Phone Hacked"
After UNLOCKNET phone starts again, but hangs on startup logo.
Solwed only using SmartClip REPAIR WITH DEFAULT EEPROM.
O0O wrote:
ODM 1.25 problem with w375 not solved.
W375 Pannon Hungary ver 072. After UNLOCKNET phone hangs after Pannon logo. After fullflash same situation.
As we all know in ODM Rocker fullflashing for W220 or W375 is realy FULLFLASHING without EEPROM, so I flashed phone using working EEPROM, as result: "Phone Hacked"
After UNLOCKNET phone starts again, but hangs on startup logo.
Solwed only using SmartClip REPAIR WITH DEFAULT EEPROM.
Can You read full backup from such phone and upload here ?
I want to test it on sample here.
In odmrocker 1.25 w375 no connect but in odmrocker 1.24 conecct correct
moto rocker v2.21 can't go to support